door panel squeak

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pukeleeland

Junior Member
Joined
Oct 6, 2010
Posts
2
Reaction score
0
Ram Year
2010
Engine
hemi 5.7
My door panel seems to be squeaking when driving on rough roads. Only the driver side door does it and it seems like the panel is a little loose. If I pull on the inside door handle, the panel doesn't seem to be tight. Has anyone else experienced this?
 

0212353

Vendor
Joined
Jun 29, 2010
Posts
26,460
Reaction score
2,029
Location
Florissant, MO
Ram Year
2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
Engine
2x 5.7L & 6.2L
mine is pretty tight, even after I removed it to install tow mirrors last week.
 
OP
OP
P

pukeleeland

Junior Member
Joined
Oct 6, 2010
Posts
2
Reaction score
0
Ram Year
2010
Engine
hemi 5.7
Is the door panel supposed to be tight? The screws that hold the panel on are tight, but the panel does move up and down (maybe 1/8") and is probably responsible for the squeak and rattle.
 

0212353

Vendor
Joined
Jun 29, 2010
Posts
26,460
Reaction score
2,029
Location
Florissant, MO
Ram Year
2019 1500 Laramie Sport Crew, 2019 1500 Big Horn Sport Crew & 2016 Charger SRT Hellcat
Engine
2x 5.7L & 6.2L
the panel is installed kinda ******. There is one screw by the door handle, and then 6-8 "screws" that push into a grommet. Then it has hooks on the back of the panel to hold it to the door.

It will move some - but not too much. Check the screw behind the flap there behind the door handle. Make sure that is tight. thats the only one that really does much. :D
 
Back
Top