Mailey
Junior Member
- Joined
- May 31, 2017
- Posts
- 3
- Reaction score
- 1
- Ram Year
- 2017
- Engine
- Hemi 5.7
HELP !!!
I recently removed my pedal commander and upgraded to a edge pulsar.
I've have done the follow;
- disconnected my positive and negative from battery
- removed the tie straps
- disconnected the 2 plugs from board
- removed board and placed pulsar and tightly flushed to board
- put plugs back on properly
- put battery connections back together. After 30 mins
I then started the truck and it has run like ****. The rpm flexuates then the truck shuts off.
Message board says service shifter. Cant go from park to anything without the truck shutting down on it's own.
I remove the pulsar and truck runs perfectly fine.
I yet to contact edge product.
Thanks for your help.
I recently removed my pedal commander and upgraded to a edge pulsar.
I've have done the follow;
- disconnected my positive and negative from battery
- removed the tie straps
- disconnected the 2 plugs from board
- removed board and placed pulsar and tightly flushed to board
- put plugs back on properly
- put battery connections back together. After 30 mins
I then started the truck and it has run like ****. The rpm flexuates then the truck shuts off.
Message board says service shifter. Cant go from park to anything without the truck shutting down on it's own.
I remove the pulsar and truck runs perfectly fine.
I yet to contact edge product.
Thanks for your help.