Fogs with Hi beam help!

[gc_harvey]

I bought a kit from MrTailLight.com Online Store and I just finished the install. It wasn't difficult to do, at all. Only problem is that when I switch to high beam the passenger side fog doesn't stay on. Anyony have any idea as to what I did wrong? I would greatly apprectiate the help so I can get this fixed before it gets dark!

 

[Cthulhu]

Being discussed by Musclemckeester (sp?) at http://www.ramforum.com/f75/how-fogs-high-beams-12714/

 

[MADDOG]

With the stock systems the fogs go off when the high beams are triggered. With the aftermarket system I'm surprised they both didn't go off.

 

[irally]

I bought a kit from MrTailLight.com Online Store and I just finished the install. It wasn't difficult to do, at all. Only problem is that when I switch to high beam the passenger side fog doesn't stay on. Anyony have any idea as to what I did wrong? I would greatly apprectiate the help so I can get this fixed before it gets dark!

If you look at the wiring diagram for the 2012 RAM fog lights you will see each fog has its own 12v feed therefore you will need to also run a 12v feed wire to the passenger side fog

 

[gc_harvey]

Thanks for the help guys. I actually got it done last night but I just saw these replies. I appreciate you all trying to help.

 

[Musclemckeester]

Being discussed by Musclemckeester (sp?) at http://www.ramforum.com/f75/how-fogs-high-beams-12714/