RamblinRod
Senior Member
- Joined
- Jan 2, 2016
- Posts
- 127
- Reaction score
- 42
- Location
- Crawford, CO
- Ram Year
- 2016 Ram 2500 CC LB 4x4
- Engine
- 6.7 Cummins
Is it possible to put a fold flat floor in a Tradesman if you can find the parts?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Is it possible to put a fold flat floor in a Tradesman if you can find the parts?
Mopar OEM Fold Flat Foor
Saw a forum member had a set of fold flat floor pieces, for sale.
Jumped all over them, not knowing if they would work, for me, or not.
Remember, I got an Express. One solid back seat, not a split seat.
However, I did not have any compartment "floor" or "Cover", at all.
If the back seat was up, I could see the storage bins, under the seat.
Drove me Nutty. Buddy's Big Horn had flip up seats, and even it has a flat cover over those bins.
I wanted something similar, so bought this fold flat floor, on a Hope.
Turned out, it worked out.
Yeah, Team Gofishn!
Here is the floor, installed. Split floor, for Split seat but works, just fine, with a solid seat.
I really like having the two hard plastic "legs" that can be flipped out to support the floor.
The hold down strap works great too. No flopping around or noise, whatsoever.
To install, simply remove the Bolt, that secures the back seat itself.
See it, from Passenger side, rear door. Here it is
http://www.midwestshutterbug.com/Z/FFF02.JPG
In the middle, since I did not have a split rear seat, I had no bolts to remove. But, I noticed that there was a cutout, in the carpet. Removed the cutout and there were my two wholes, with nuts underneath, already welded to the cab, just waiting for my to buy a couple of bolts.Which I got from my local hardware store.
Now, if you look at the picture above, you see there is an extra hole, above the bolt, where it looks like another bolt could go in. Uh uh. No hole in the floor board for it. MEthinks it is a guide pin. There are guide pins, on each side of the seat I do have.
Here is the drivers side rear door view and the bolt that holds the seat, in place, simply remove, put your floor in place and reattach the bolt.
Here is my Fold Flat Floor Mod, all opened up, ready for my Gear.
Ignore all the junk on my Husky floor mat. I swear, I vacuum the Truck.
Really, I do, Got a vacuum hanging on my garage wall and just used it, yesterday.
Even pulled out the floor mats, wash them down, let them dry and stuck them back.
Turn my head, for one second, and the damn things are dirty again.
Do you know that part numbers to these? Or maybe what part numbers I would need?
Sent from my iPhone using Tapatalk
I would say at least the SLT and above. I know both the BigHorn and Outdoorsman which are both based off the SLT trim level have them, the Rebels probably do too.Junk Yard Question: Do you guys know what Ram trim packages the fold flat floor comes standard in from 09-18?
Is it possible to put a fold flat floor in a Tradesman if you can find the parts?