Gauges

[the codes]

well, here lately I have been playing with the idea of getting a pillar and filling it with gauges. as far as I can tell, aero force doesn't make one for our years, so I was gonna see what y'all thought I should go with?

I was thinking one I'd make a/f ratio..not
sure on the other two. maybe teams temp?

thoughts?


Tapatalk Addict

 

[TheSatinPumpkin]

Trans temp and oil psi imo.

Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

 

[Catchin Zs]

I was just thinking of this today. You tryina run a triple gauge setup?

 

[the codes]

yeah, I figure if I'm gonna run any mind as well max out the space lol

thanks for the imput d


Tapatalk Addict

 

[directconnection189]

I'm looking around to for a pillar let me know what u find I was thinking EGT, trans and a wide band

 

[the codes]

yeah ill post up what I end up going with


Tapatalk Addict

 

[Catchin Zs]

I deff want a trans temp, not sure what else though..

 

[BLKDODGE04]

This is off topic but i just joined this forum, how do u go about posting a new thread?

 

[TexasRammer]

Trans temp and oil psi imo.

Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

These, those are the 2 I would want to do

 

[talon6]

i use all aem guages in my triple pod. i just like that they match my dash like stock. trans temp, a/f guage, and boost. they send 2 covers with them. you can make the faces white or black. with red digital readouts. and to me when you start throwing guages in they should all match. looks tacky when you start using different guages.

 

[KGBIGCOUNTRY]

Tran temp, Oil pressure, Oil temp

 

[txbass06]

Tran temp, Oil pressure, Oil temp

This

 

[talon6]

Tran temp, Oil pressure, Oil temp

why not a/f? that is the first one i got. a/f is pretty important. not that the other ones arent though.

 

[KGBIGCOUNTRY]

Only reason I didnt suggest A/F was because I dont think he was planning on running a cam or extensive motor work. Cody forgive me if you are running a tuner or plan on diving into the motor then yes I would suggest an A/F meter. I know most of your stuff looking through the mods were visual that I could remember. Looking at your build Zack you were planning on going into the motor so I agree the A/F was the wise choice, just dont know the plans for his.

 

[talon6]

i got ya. i am gonna install more guages sometime. gonna use the little cubby whole in the dash for 3 more. oil pressure,oil temp, and ?. havent decided yet on the 3rd one yet.

 

[KGBIGCOUNTRY]

Seeing as your running diff pump for boost could run a fuel pressure gauge to make sure your not dropping pressure at the topend of the power band.

 

[loki223]

or an edge juice with attitude, full LCD touch screen, customizable, and can show whichever guages you want, and, program you truck at the same time. makes sense to me to get one thing to cover it all...but if i were to pick 3 for a half ton, A/T temp, Fuel pressure, rear dif temp. Doesn't your stock IC have an oil pressure? i know in my truck it does, and my truck has boost, EGT, and tranny temp, i want to add Fuel PSI after lift pump, and if i can, after IP...than also add front and rear dif temps...

 

[Okiespaniel]

On a gas truck the only really guages that matter besides your stockers are tranny temp, A/F if you have a reprogramable tuner, and maybe vacumn for mileage.

Avoid the urge to over guage. Sometimes too much is just that.

 

[garner]

I would get something similar to what the 4th gens have in the evic; trans temp, oil temp, coolant temp, and oil pressure

 

[talon6]

Avoid the urge to over guage. Sometimes too much is just that.

i way disagree with this. never nothing wrong with monitoring everything that you can. it can only help you know what your truck is doing.