Gen 4 Aux switch control install

[wrench78]

Thinking about adding a Auxbeam Aux 6 switch setup. I had one in my Jeep and loved it. I need mounting ideas. for the control unit in the cab. I was thinking up by the moon roof switch area but not sure if the headliner could hold the weight. Please post up any pics you have of mounting ideas. Thanks everyone. Trying to put in the least about of holes as possible. (once and done concept.)

 

[Badger 13]

I used the open space in the console and installed a Spod switch panel. Newer versions of the Spod, along with other brands offer smaller electronic switch controllers which would take up less space.

 

[swine]

Edge pillar pod
No drilling.

 

[ric221]

@Badger 13, I like your analog clock. Where did you get it and is it powered by your truck? Nice switches also.

 

[Badger 13]

Thank you. The clock is from Formotion Products. It is battery powered similar to a watch battery. They were originally designed for motorcycle use and came with a small bracket that attached to the back of the clock. I used a piece of heavy leather that I had ling around and friction fitted to that little cubby space in the dash. Drilled a hole through the leather and mounted the clock to it. If I have to change the battery I can just pull out the leather it is mounted on. I see now they also offer item with a "stick on" back as well.

Shop Formotion Mini Clocks, Thermometers and Accessories — Formotion Products Inc.

Mountable high-endurance stainless-steel analog clock and thermometer gauges for all types of vehicles and environments. Motorcycles, Boats, Planes, RVs, Scooters

www.formotionproducts.com