HELP BTW powerboard nx sag

[Texas_Cornhusker]

So installed Best Tops powerboard nx. Everything works great, but the board sags in the rear, see attached photo. I have readjusted the linkage a million times and no resolve. I see other installs that look fine. I can't find any other people with this issue online. It's literally driving me insane.

 

[Texas_Cornhusker]

Fixed issue with shims. all is well

 

[Steveo8x8]

What did you pay for these if you don't mind me asking?

 

[14RAM4X4]

Fixed issue with shims. all is well

What did you shim? It's funny, but I kept adjusting mine too. Then I went over a high curb a little too fast and my CC bounced low enough to hit the front of the board and now the front tucks up nicely

So I'm going to put a jack and 2x4 under the center and try loosening the bolts and jacking the brackets up with the 2x4 and tighten all the bolts and see if it helps.

I can't stand that gap you see from the side either...but thats just my OCD because according to Bestop, that gap is normal as long as it's uniform.