Help get Silver running again!!

[Silverbullet08]

something was leaking oil... turned out it was the gasket on the valve cover that got messed up when i put it back on last

 

[Silverbullet08]

Nick, what are your LTFT's now?

cruising around 65-70 they were around the -10 around that area. is that normal?

 

[Off_Road_Teacher]

cruising around 65-70 they were around the -10 around that area. is that normal?

Yes, that is right around where mine are when cruising. When you are feeling it stumble at idle or when you stop it is probably pulling a little too much fuel and leaning it out. At least that is what would happen with me when I first reload the tune.

 

[Silverbullet08]

ok that is good. how long did it take for yours to learn it fully

 

[Off_Road_Teacher]

ok that is good. how long did it take for yours to learn it fully

Well, I would say about three days worth of key cycles. You know, drive it to work, drive it home, a couple trips after work. Do that for a few days and the stumble should be gone.

 

[Silverbullet08]

sweet!!! valve cover back on. im getting good and taking it on and off haha

 

[Off_Road_Teacher]

sweet!!! valve cover back on. im getting good and taking it on and off haha

Now get out there and get a 0-60 time.

 

[sawcut64]

Another thing to remember Nick is even pinhole leaks in exhausts can cause issue's with some trucks and depending on where they are located. Try to get that one O2 **** plugged, small leaks can cause a vacuum affect with the exhaust flow because the exhaust flow kind of pulsates. A hole will blow exhaust gas out and suck in outside air effecting O2 readings.

 

[Silverbullet08]

im stopping by the shop to see if they have one before i go.

holy crap! this thing pulls now!!

 

[shadow11]

im stopping by the shop to see if they have one before i go.

holy crap! this thing pulls now!!

Damn your making me jealous now.

 

[Silverbullet08]

yea i just tried on the highway lastnight. punching it at 60. got it to 80 in no time. love it!! this was all worth it!!

 

[Bigtman07]

Good deal nick. So when is that road trip lol

 

[Silverbullet08]

right now lol

 

[AF_Hemi]

told ya it would all be worth it!! its hard to remember all the struggles when you hit that throttle

 

[glass3222]

Glad it is running well...... now where is the 0-60 time and video?

 

[Off_Road_Teacher]

Glad it is running well...... now where is the 0-60 time and video?

X's 2. Let's see the numbers.

 

[Ram Man]

Now I think we can officially say, well done and good job af and bullet!

 

[03MopaRamman]

Glad to here it's runnin good Silver!

 

[truckin151]

Glad its working.......now where are those numbers? Lol

 

[blk05hemi]

Good job bullet