cgworth
Junior Member
- Joined
- Oct 16, 2014
- Posts
- 17
- Reaction score
- 16
- Ram Year
- 2011
- Engine
- 5.7 hemi
I have searched all over and cant find any info on what to set the frequenices at, Maybe Its because im out of my league who knows, but this MS8 sounds like crap no matter how i set it up. anyone have an idea at what settings to use? Also the Sub doesnt hit very hard and actualy the most movement i see out of it is during the acoustic setup on the MS-8. There is also a huge difference in sound going from radio to music stored on the HU. HU is stock 430n RHB
L/R Dash
Infinity Reference X REF-3002cfx
3-1/2" 2-way speakers (pair)
Plus One+ polypropylene woofer cone with hi-roll rubber surround
PEI balanced dome tweeter
True Four Ohm Impedance technology: speaker's 3-ohm impedance combines with speaker wire impedance for a 4-ohm load
compatible with virtually all factory or aftermarket car stereos
power range: 5-25 watts RMS (75 watts peak power)
frequency response: 85-21,000 Hz
sensitivity: 91 dB
Front Doors
Polk Audio DXi651s 6.5"
power range: 6-55 watts RMS (165 watts peak power)
frequency response: 50-22,000 Hz
sensitivity: 92 dB
Rear Doors are stock
Sub
12"Kenwood KFCW12DVC
AMP
JL Audio JX500/1d
300 watts RMS x 1 at 4 ohms
variable low-pass filter (50-200 Hz, 12 dB/octave)
L/R Dash
Infinity Reference X REF-3002cfx
3-1/2" 2-way speakers (pair)
Plus One+ polypropylene woofer cone with hi-roll rubber surround
PEI balanced dome tweeter
True Four Ohm Impedance technology: speaker's 3-ohm impedance combines with speaker wire impedance for a 4-ohm load
compatible with virtually all factory or aftermarket car stereos
power range: 5-25 watts RMS (75 watts peak power)
frequency response: 85-21,000 Hz
sensitivity: 91 dB
Front Doors
Polk Audio DXi651s 6.5"
power range: 6-55 watts RMS (165 watts peak power)
frequency response: 50-22,000 Hz
sensitivity: 92 dB
Rear Doors are stock
Sub
12"Kenwood KFCW12DVC
AMP
JL Audio JX500/1d
300 watts RMS x 1 at 4 ohms
variable low-pass filter (50-200 Hz, 12 dB/octave)