dylanprobert293
Junior Member
- Joined
- Apr 2, 2023
- Posts
- 5
- Reaction score
- 0
- Location
- prince edward island
- Ram Year
- 2009
- Engine
- 5.7 hemi
i have a 2009 ram 1500 crew cab with the base radio with uconnect, i bought a kenwood dmx7709s touchscreen radio, i have most of the wires hooked up accept a few
radio wires
-only wire i don’t have hooked up is the red wire which is a ignition wire, but i do not know where to hook this up as i can’t see a ignition wire on the truck diagram
dash harness
-i have the uconnect wires not connected to anything obviously, but then i have 2 wires that aren’t connected too, in the wiring diagram on is CAN IHS BUS (-) and it goes to computer data lines
second wire is CAN IHS BUS (+) and it also goes to the computer data lines
where do i hook these up if at all?
radio wires
-only wire i don’t have hooked up is the red wire which is a ignition wire, but i do not know where to hook this up as i can’t see a ignition wire on the truck diagram
dash harness
-i have the uconnect wires not connected to anything obviously, but then i have 2 wires that aren’t connected too, in the wiring diagram on is CAN IHS BUS (-) and it goes to computer data lines
second wire is CAN IHS BUS (+) and it also goes to the computer data lines
where do i hook these up if at all?