I broke my vent [emoji2369]. Part number ? I can’t seem to find it

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Addicted2fishing

Senior Member
Joined
Jul 2, 2017
Posts
3,077
Reaction score
2,821
Location
Durham region
Ram Year
2017
Engine
HEMI 5.7
One of those febreeze thingies melted the rubber on my vent adjuster thingy. I tried removing the melted part and broke it all to bits.

Anyone have a part number where I can find the slots ? Or the whole thing? I took the bezel off and noticed it looks like I may just be able to replace whole thing ? Junk yard maybe ?


Sent from my iPhone using Tapatalk
 

buddy guy

Senior Member
Joined
May 22, 2019
Posts
2,559
Reaction score
2,120
Location
alberta
Ram Year
2018
Engine
5.7 hemi
lots on ebay. i did find a new right one on ebay with what appears to be a part # as well as a bunch of used ones. the new ones don't look cheap. 105 bucks

Ram CHRYSLER OEM Dash Air Vent-AC A/C Heater Duct Outlet Louvre Right 5MK68DX9AA
 
OP
OP
Addicted2fishing

Addicted2fishing

Senior Member
Joined
Jul 2, 2017
Posts
3,077
Reaction score
2,821
Location
Durham region
Ram Year
2017
Engine
HEMI 5.7
lots on ebay. i did find a new right one on ebay with what appears to be a part # as well as a bunch of used ones. the new ones don't look cheap. 105 bucks

Ram CHRYSLER OEM Dash Air Vent-AC A/C Heater Duct Outlet Louvre Right 5MK68DX9AA

Thanks! I looked on eBay and the left ones seems to be cheaper lmao. [emoji2369]. At least now I have a part number. It looks kinda cool without the vent slots TBH but I’d have to figure something out for the holes lol. Also, if means I’d have to break the left side too. First world problems


Sent from my iPhone using Tapatalk
 
Last edited:

buddy guy

Senior Member
Joined
May 22, 2019
Posts
2,559
Reaction score
2,120
Location
alberta
Ram Year
2018
Engine
5.7 hemi
The problems are real! LOL. Especially if you're OCD like me. I realized how bad it was for me when I bought my Victory motorbike. I figured brand new, warranty. Don't do a thing. Then I started reading concerns from a handful of people that Polaris would bail out of supporting the bikes prematurely (when they shut Victory down, they had to commit to I think it was 10 or 15 yrs of providing parts) AH....but my mind thinks...who says they have to provide them at a reasonable price (reasonable being relative for most bike parts prices!) So, i start hoarding parts. buy a good used belt, a few extra fuel filters, hell..good used starter? why not. deal on a new fuel pump? sure!. (None of which I had issues with and I was only putting 2000 miles a year on my bike. lol)

So, yeah...real first world problems. lol
 
OP
OP
Addicted2fishing

Addicted2fishing

Senior Member
Joined
Jul 2, 2017
Posts
3,077
Reaction score
2,821
Location
Durham region
Ram Year
2017
Engine
HEMI 5.7
The problems are real! LOL. Especially if you're OCD like me. I realized how bad it was for me when I bought my Victory motorbike. I figured brand new, warranty. Don't do a thing. Then I started reading concerns from a handful of people that Polaris would bail out of supporting the bikes prematurely (when they shut Victory down, they had to commit to I think it was 10 or 15 yrs of providing parts) AH....but my mind thinks...who says they have to provide them at a reasonable price (reasonable being relative for most bike parts prices!) So, i start hoarding parts. buy a good used belt, a few extra fuel filters, hell..good used starter? why not. deal on a new fuel pump? sure!. (None of which I had issues with and I was only putting 2000 miles a year on my bike. lol)

So, yeah...real first world problems. lol

Well, if you sell it or store it you have parts you can probably sell for a way higher price. I’m surprised at how expensive small parts for these trucks


Sent from my iPhone using Tapatalk
 

Latest posts

Forum statistics

Threads
211,428
Posts
3,066,511
Members
171,919
Latest member
Pocho808
Back
Top