I'm Back again, with a Power Window issue!

[SolidWaste]

Hello again,
So I hope this is the correct placment for this issue, but my Power Windows have stopped working, but only on the Passanger Side. The Power Locks work just fine and the Driver side Windows work just fine. The only recent change that I feel coul of caused this is:

The Trim part that sits ontop of all the switches on the Driver side broke, so I took it, disconnected the entire block that holds all of the switch, dropped a bit of super glue, let it dry and reassmebled.
I had to of reconnected it correctly because they only connect 1 one way.
I found the fuse for the Door Locks (it was good) because I was told the windows are often wired through those (There is no Fuse that says its for Power Windows in the Owners Manual or the Googles.).

Has anyone ran into this situation or a simalar one? Any information would be awesome and Thank you for your Time!

 

[tron67j]

3rd gens were notorious for the solder point on the driver master control panel breaking. I had it go, and at the time found a number with similar issues. The entire lock control panel just pops out. Order a replacement and should fix it. Just wondering, do your rear windows also not go down from master control?