Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
So you don't have that option for active gridlines , but you have the lines right ? You just don't have the option to turn them off ? I've confirmed the guy I purchased my RA2 5.0 Radio from that it DID HAVE the active grid lines when he had it ? I wonder if being shut off for an extended time (6 mo. per previous owner ) it would loose certin functions related to software update ?I don't believe I have that settings option for the Active Gridlines either. Might be dependent on the Radio's Software Version though.
EDIT:
I have finished (@99%) the schematic for the Ram Camera Add-On Kit and added the reference to post 10..
Here is the basic factory schematic for the Factory and Add-On Kit for the Radio ...
2013+ Factory & OEM Add-On Kit PN 82214240 schematics.png
- I still need someone to verify/ohm out whether or not the Yellow and Purple wire in the kit's Body Harness are connected or not.
I'll get you some pics of the radio, chassis, and bcm connectors tomorrow.
MTGTS,ok, here are some pics of the wires, harnesses, plugs as they currently sit. Let me know what you guys think.
MTGTS,
PS: Exactly what parts and P/n's did you already purchase and install in the tailgate? I'm wondering if you got everything you needed back there too.
I have to go to work soon and won't be able to help as much the rest of this week.
@MTGTS,
You do have the wires going from the tailgate to the Factory Cab/Chassis Connector C322 under the left front Wheel well (although the colors don't appear to match the factory schematic. See 2500 Schematic in post 14)
Now the question is, do you have the 3 video wires from C322 to i315 (by the break pedal (check the pins) and
Then do you have the 3 Video wires continued on from i315 to the back of the Radio C1?
***This is likely what you will be missing***
You may be in luck and just need the XAC code flash (edit: that is already done)
I will add pictures in a sec to this post.
Note: The colors for the camera wires in these pictures do not apply as they are from JeepGuy's harness, but the pins will be correct for factory wires if they are indeed there from the factory.
EDIT:
(Here are the 3 video Inputs for CustomTronix Jailbreak):
Backup Cam: 31, 32, 33
CHMSL Cam: 21, 22, 23
Front Cam: . . 24, 25, 26
Well MTGTS, this is strange...
- Verify that you have the following parts in the tailgate:
Camera Lock Jumper Harness P/N P68096415AC
Tailgate Wire Harness P/N P68189124AB
Post 228 edited. Have a look.
Verify the P/N's on the harnesses in the tailgate.
That's correct, what about from there down to the i550?I have p68189124ab in my tailgate.
That's correct, what about from there down to the i550?
Camera Lock Jumper Harness P/N P68096415AC
See Attached, courtesy of JeepGuy1980No, nothing. Didn't have it on my last truck either. Where does it plug into inside the tailgate? Pics of this harness?
See Attached, courtesy of JeepGuy1980
Thanks, I'm ordering one now. Hopefully this solves everything. Wonder why i didn't need that in my last truck.
Dang, Don't order it! Verify if you have it or not first!
One end of it is the i550 that comes through the tailgate.
There is a good chance it is already in there.
You still need to research the wiring from the i550 to the c322 anyway, otherwise your wasting money.
Your call on ordering then. You may still end up buying the official kit though.p68224929aa is the other harness in my tailgate
Your call on ordering then. You may still end up buying the official kit though.