Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks, I'll get a hold of him after the weekendGet in touch with John Lance on Facebook, you can find him in the 4th gen rams fb group. Great guy and very knowledgeable, he can tell you exactly what you need and walk you through it. I got a factory remote start kit from him for one of my trucks for about $40.
Link to his fb profile: https://www.facebook.com/profile.php?id=100007737137301&mibextid=LQQJ4d
Nevermind, found the demo versionFair enough
Is there a shareware version of alphaOBD?
I seem to remember having had it once but it not working due to interface issues, but now, I only see the full 50 dollar version
No worriesYour looking to dump (unnecessary) cash for remote starting you truck, but your not willing to spend the $50 for the program that will help you enable this?? I'm sorry but AlfaOBD is the reason your able to accomplish this and I'm sure the developers have invested greatly to give this ability to us, but you go ahead and try this done within the "15 minute" trial period. LOL
Sorry for the rant but I have seen many others who had this mentality, only to then ask other members of the forum if they live close by, so they can bail them out of all the mistakes they made in said 15 minute time challenge. Good luck
Im sure it does, im just saying, the first 50 pages (of a 1400 page thread) seemed to focus on thatSuggest you do some more reading, the software will do way much more than those two items.
FYI, you may or may not have already need fully wired. I made a video explaining how to confirm that here:allright gents, this is where im at
i went in under the dash and cut the wire going to pin 11 (read later it goes through the firewall and dead ends under the fusebox, in retrospect, had i known that i would have grounded it there, instead of cutting it under the dash)
so, cut it, ground the end going into the BCM
then went into alfaOBD and set
remote start present:yes
hood latch present:yes
hood latch resistor: 500 OHM
reset RF hub
as soon as my key inlays get here ill be all set
(i opened the keys and with by moving the contact around i can get it to remote start no problem)