ISO Billet style grill

[Gruntledlark]

Does anyone know of a source for a billet style chrome grill replacement for a 4th gen 1500 (mine is a 2019 Classic). I want one without the big cross, without the "RAM" or the goat head. I just want horizontal bars that go edge to edge, preferably with the frame chromed also, but I'd be ok with a painted frame. I just can't seem to find one anywhere unless it's in the >$1000 range. TIA

 

[Ramm5.7]

Does anyone know of a source for a billet style chrome grill replacement for a 4th gen 1500 (mine is a 2019 Classic). I want one without the big cross, without the "RAM" or the goat head. I just want horizontal bars that go edge to edge, preferably with the frame chromed also, but I'd be ok with a painted frame. I just can't seem to find one anywhere unless it's in the >$1000 range. TIA

Ebay....
Edit...just saw you need to cut your shell
https://www.ebay.com/itm/233629701033

 

[RodeoRam]

So something like this?



I put this on my 2001. https://www.lmctruck.com/, but it doesn't look like they have anything more recent than 3rd gen.

Beware, mine sings between 35 and 45 mph and at a higher octave beginning at 70 mph. They are acting like reeds out of a woodwind.

 

[Gruntledlark]

So something like this?



I put this on my 2001. https://www.lmctruck.com/, but it doesn't look like they have anything more recent than 3rd gen.

Beware, mine sings between 35 and 45 mph and at a higher octave beginning at 70 mph. They are acting like reeds out of a woodwind.

yep. something like that. I think the active vent thingy behind the grill on the 4th gen might alleviate the whistling

 

[kidmandudebro]

I want something like this, OP check this out? do they make them or will this fit a 1500 express?

Only says 2500/3500

 

[rule18]

I want something like this, OP check this out? do they make them or will this fit a 1500 express?

Only says 2500/3500

link?

 

[FN 2187]

I think eBay would be a good option. I've seen several in the sub $300 range.

 

[NJMOPAR]

$72 and use your existing shell.

https://www.amazon.com/dp/B01G4A6O8Q/ref=cm_sw_r_cp_apa_i_ZbDmFb7CGG55Q

$117 same type

https://www.amazon.com/dp/B01HOVQ9UM/ref=cm_sw_r_cp_apa_i_ReDmFbEJGPHRT

 

[kidmandudebro]

link?

My bad, thanks.

https://www.summitracing.com/parts/tbg-20452?rrec=true

 

[Gruntledlark]

$72 and use your existing shell.

https://www.amazon.com/dp/B01G4A6O8Q/ref=cm_sw_r_cp_apa_i_ZbDmFb7CGG55Q

$117 same type

https://www.amazon.com/dp/B01HOVQ9UM/ref=cm_sw_r_cp_apa_i_ReDmFbEJGPHRT

I've seen lots of these but they require me to use the existing shell. My shell has that big cross in it and I think you need to cut that out to fit this insert. If I do that I'll have 4 ugly holes where that cross meets the shell. I want a drop in replacement that looks like that insert.

 

[Gruntledlark]

My bad, thanks.

https://www.summitracing.com/parts/tbg-20452?rrec=true

That item says its for 2500, 3500, 4500, etc. It doesn't mention 1500 at all. Are the grills on the heavy duties that much different from the 1500?

 

[kidmandudebro]

That item says its for 2500, 3500, 4500, etc. It doesn't mention 1500 at all. Are the grills on the heavy duties that much different from the 1500?

Thats what I what i was wondering. I found another but they want $500 bucks for it! Thats a bit to steep.