LED Fog light pods REVIEW / INSTALL PICS

[FlatLandRam]

From what I've read on many forums it's straight plug and play with the new harness. I've heard some people mention adding a really but the majority has reported having no issues.


Sent from my iPhone using Tapatalk

Cool If that's the case it looks like im making an order and installing the led cube fog lamp kit and a 20 inch between the tow hooks

 

[Fubar65]

I'll be posting mine for sale when I get back from vacation on Monday. Has everything needed for the hookup

 

[DERJ]

Do these Sidetracked Offroad LEDs have any blue to the light? Their website lists their color temp at 6000k...

I'm looking to install a set of these AND swap my low beams to HIDs, but I want to make sure the color is the same - are these LED fog light cubes the same color as 6000k HIDs or do they better match the 5000k HIDs (no blue present)?

 

[Motivology]

Well guys, I ended up pulling my LED fog cubes off. Went back to the stock housings for that OEM look but put in a 7200lm LED bulb kit (3600lm / bulb) and they are BRIGHT! Plug and play install. Way brighter and a more cleaner look IMO than the LED cubes were. It was 99$ for the kit. Just an option for yall if you want to keep the OEM look but have high quality, bright LEDs instead.

Do you happen to have pictures of this setup?

 

[firemedic10584]

Do you happen to have pictures of this setup?

No, but I can get some. Everyone I have shown these lights to have been highly impressed. I don't even use my low beams at night and even if I do, I can barely even tell the difference with them on. One of the best 100$ mods I've done.

 

[Motivology]

No, but I can get some. Everyone I have shown these lights to have been highly impressed. I don't even use my low beams at night and even if I do, I can barely even tell the difference with them on. One of the best 100$ mods I've done.

I'd love to see it when you get a chance! Sounds like something I'd have to put on my mod list.

 

[Ramguy65]

Just did mine too.

Sent from my SM-G925W8 using Tapatalk

 

[VegasDragger45]

Got mine installed I only used one wore to make the length shorter so I cut off the plugs and soldered the wires





Sent from my iPhone using Tapatalk

 

[jadocs]

No, but I can get some. Everyone I have shown these lights to have been highly impressed. I don't even use my low beams at night and even if I do, I can barely even tell the difference with them on. One of the best 100$ mods I've done.

What kind (9006, 9005, 9145/H10) and brand of LED bulb did you install?

 

[TRIGGER_Hemi]

finally got around to installing mine, going to be nice when towing the boat thru some of the sketchy dark back roads by the river.

 

[TRIGGER_Hemi]

and the lights on, i have weak H1 builds but my Morimotos came today

 

[JinxCanada]

subscribed

 

[develand]

Trying to decide between doing the LED pods like in this thread, or doing a 30" bar in the lower bumper.

The main perk I see to the fogs, is after some soldering it is all plug and play.

 

[madrock]

I have 4 Rigid Dually's in my factory fog location. It is a very tight fit and a major PITA to make any kind of adjustment. I may try single 7" bars instead.

 

[GOGO]

Great mod. I did the same on my truck and love it.

 

[JGBimle]

I've got a set of these brackets and the wiring pigtails from Alteredoffroad, PM me if anyone is interested.

I decided not to run them because they weren't plug and play on my 2015 and I didn't want to wire up a relay for them. Not sure if everyone has been having this issue with the 2015s or if some have worked.

 

[easydog]

9005/9006 headlight splitter

If anybody in Canada needs help with the 9005/9006 high beam splitter, they are available through the following link, and they will send them to you via usps. High Beam Splitters - Wire Harnesses - Components

Good luck
Easydog

 

[madrock]

I swapped out the 4 Duallys for 7" pods. Up close the gap is bigger than Michael Strahan's front teeth but not bad otherwise.

 

[Power247]

I swapped out the 4 Duallys for 7" pods. Up close the gap is bigger than Michael Strahan's front teeth but not bad otherwise.

I like the look of the 7" pods better.

Greg
2012 CCSB CTD 2500 | XRT PRO w/MCC by Double R Diesel

 

[robval1987]

Well did this mod today, installed KAWELL 30 degree lights. First I made a template, then drew a line with grease pencil from the center of the 2 rear sensors, taped down template after centering, traced with Sharpie marker, then took a 4.5 cutting wheel and cut the 4 lines, cleaned up shavings with a dremell, applied rust prevention/ inhibitors to stop rust, place lights in hole and marked the mounting holes. Install light, bolted it down, install 2nd light and wired in. I used my #2 Aux switch, (hot all the time even without a key). Pics provided...