LED Upgrade

[cccp1989]

This is what I found out. This how mine our. When the truck is off and the doors are closed and i press the led light it does not turn on. But when the truck is started they all work even when pressed.

Sent from my HTC_Amaze_4G using Tapatalk 2

 

[BigDogg795]

This is what I found out. This how mine our. When the truck is off and the doors are closed and i press the led light it does not turn on. But when the truck is started they all work even when pressed.

Sent from my HTC_Amaze_4G using Tapatalk 2

Lol, mine flashes!

 

[LB3711]

Mine all work like normal. Just as the oem bulbs do.


Sent from my tapatalk equipped AT&T iPhone 5

 

[Sweetee]

Greetings,

Sorry I don't have pix, but here is what I did. I wanted a bit more light in the cab of my 2012 Express RCSB. Not having lights in the footwells has been a disappointment and I still haven't figured out a "clean" way to add footwell lights. I ordered 2 of the following on Amazon (Amazon.com: NEEWER® T10 36 SMD LED Light Festoon Dome Bulb Lamp White 12V: Home Improvement). I spliced them together and replaced my single dome light bulb with them. I now have 72 LEDs lighting up my cab. The wife is worried that landing planes will mistake me for a moving signal beacon! When she goes shopping at night, I can now read in comfort while I dutifully wait in the truck!

 

[LB3711]

you can do that but I went with the factory look. I didn't feel like retrofitting a LED panel in there

 

[usmfan789]

Man just got my bulbs in the mail not gonna lie I stared at the bulb names for twenty mins before it suddenly hit me how you listed the part but hoping to have them done up by sunday

 

[LB3711]

lol

 

[2K10HemiRam]

I need to upgrade my interior lights to led sometime soon, they're really starting to bug me since I put leds in my cargos and reverse lights.

 

[LB3711]

do it. its well worth it

Sent from my Transformer TF101 using Tapatalk 2

 

[usmfan789]

I'll post pics when I get to it.... As soon as I got my bilsteins in The mod bug hit hard my wife is getting furious with me lol

 

[cccp1989]

I got 20 led bulb for map light and 16 led bulb for rear.

Sent from my HTC_Amaze_4G using Tapatalk 2

 

[LB3711]

looks good

 

[Bob crew cab]

Got my leds installed. They flash when the truck is not running. Work normal when the truck is running. If I leave one of the factory bulbs in the map light every thing works fine. What do I need to do to fix this problem? Thanks Bob

 

[usmfan789]

Well got the LEDs installed, i shorted one of the visor bulbs cause i forgot to disconnect the negative on the battery like a idiot , once it gets dark I'll take some pics, LB3711 how'd you get the upper glovebox bulb swapped over? I can't get my fingers around the bulb

 

[BigDogg795]

Got my leds installed. They flash when the truck is not running. Work normal when the truck is running. If I leave one of the factory bulbs in the map light every thing works fine. What do I need to do to fix this problem? Thanks Bob

Coincidentally, mine does the same. If I need the light with the truck off, I just rotate the dimmer switch full right.

 

[usmfan789]

I need to upgrade my interior lights to led sometime soon, they're really starting to bug me since I put leds in my cargos and reverse lights.

You got the bulb list for the cargo and reverse lights

 

[PentastarCrew13]

Thanks just what I was looking for

 

[LB3711]

You got the bulb list for the cargo and reverse lights

cargo and reverse bulb are the same 921 but the reverse light is a special 4th gen specific bulb

 

[Stangshcky12]

Well got the LEDs installed, i shorted one of the visor bulbs cause i forgot to disconnect the negative on the battery like a idiot , once it gets dark I'll take some pics, LB3711 how'd you get the upper glovebox bulb swapped over? I can't get my fingers around the bulb

My dads flash too but will stop if you open the glove box lol
I pulled the upper and lower glove box out to change that bulb
It's one 9/32 bolt (I think) to remove and you have all the room you could want to get he bulb put and back in

 

[TexasCornBread]

Beautiful work . Also good right up on bulb numbers


TexasCornBread - If you can't Dodge it RAM it !