B-RadsBadRam
Senior Member
Ordered up some LED's for my tails and when I got them one of them didn't work so the guy sent me four more LED's and two extra resistors for the hassle. So I figured I'd get rid of 2-40 bulb 3157 wegdes that fits 4th gen tails and front turn if not mistaken and also will work on some 3rd gens. Check for your application. Also 2-6ohm resistors to go with, I installed one but didn't get my wires connected good so I removed and then it started raining so went back the next day but didn't pay attention and used a different resistor, should work fine I had just lost the little metal piece that crimps the wire but I found it so they are ready to install. $40 shipped
