Light bar hook up help

[calvinbr]

I have a 2014 Ram tradesman 2500hd. It does not have a bumper with fog lights. I am getting a bull bar to put on front to install it on. Where would be a good spot to tie the wiring in at? I don't have any switches inside the truck and would prefer not to install a switch in the dash. If that's what I have to do I guess I will do that. Thanks for any information

Calvin

 

[jeffcotransplant]

if you don't have a sunroof, why not use the location for the sunroof switch between the map lights? I keep thinking that's where I'll put mine.

 

[iam_canadian22]

In my opinion you would need to install a switch regardless, if you chose to use high beams as a trigger they would always be on with your highs which will get you in trouble quickly, if you used fogs well then then your stuck with it only workin with your lows, unless you get the kit to turn your fogs on with your highs then that might work


Sent from my iPhone using Tapatalk

 

[calvinbr]

Thanks for the info

 

[SIhemi]

Im not 100% sure but the wires should still be there for your fogs. On your headlight switch can you press it in. That's how you would turn the fogs on if they came stock. If you do than you should be able to tap into the wires that r there.

 

[calvinbr]

Thanks Sihemi,
Went out to check the headlight switch and it's not for fog lights. It will not push in. It just turns for the lights.