joedmoran
Junior Member
We're buying a bumper pull toy hauler with a dry tongue weight of 1600#. It's reported that the loaded tongue weight without a toy in the back can reach 2000#. This exceeds the 1800# tongue weight limit of the factory hitch. I can't find any info if the TW limit is increased with a WD hitch.
There are great aftermarket hitches but most seem to install under the factory hitch since Ram uses the same brackets to mount the bumper.
The toy hauler needs the ball at 32", well above the factory receiver at 23.5" so I really don't want a lower receiver.
I also need a 2½" receiver to fit the shank on the WD hitch.
Curious if anyone has a recommendation.
Thanks!
Sent from my SM-G781U using Tapatalk
There are great aftermarket hitches but most seem to install under the factory hitch since Ram uses the same brackets to mount the bumper.
The toy hauler needs the ball at 32", well above the factory receiver at 23.5" so I really don't want a lower receiver.
I also need a 2½" receiver to fit the shank on the WD hitch.
Curious if anyone has a recommendation.
Thanks!
Sent from my SM-G781U using Tapatalk