LT tire Psi

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Keepontrukin

Junior Member
Joined
Aug 18, 2025
Posts
2
Reaction score
1
Location
Louisiana
Ram Year
2019 Classic
Engine
5.7
I have a 19 Classic. Crew 2wd 5.7. Just switched the rear17 inch P metric tires for LT and while towing my 5000-6000 pound trailer it was about as loose as can be on the highway. Any bump had me going sideways. The pressure was at 50. The tires say 80 max. Should they be higher? The original tires I had was around 44 and they handled well.
 

Trucker J

Junior Member
Joined
Apr 19, 2020
Posts
18
Reaction score
11
Location
Newport News, VA
Ram Year
2007
Engine
5.7
Tires are the first part of your suspension. LT, Light Truck, tires are designed for stiffer sidewalls thus giving the ability to handle more weight unlike P, Passenger, rated tires. I have LT tires and run 55 psi in the front and 45 psi in the rear. I increase when I haul or tow more weight.
 

rzr6-4

Senior Member
Joined
Jan 25, 2022
Posts
1,219
Reaction score
2,369
Location
nebraska
Ram Year
'09 2500
Engine
5.7 hemi
Higher PSI will make them even more bouncy and ride rougher. I'd go down to 43-45 and reassess.
 
OP
OP
K

Keepontrukin

Junior Member
Joined
Aug 18, 2025
Posts
2
Reaction score
1
Location
Louisiana
Ram Year
2019 Classic
Engine
5.7
i get what yall are saying but i would figure more pressure would help some since they are built for it
 

rzr6-4

Senior Member
Joined
Jan 25, 2022
Posts
1,219
Reaction score
2,369
Location
nebraska
Ram Year
'09 2500
Engine
5.7 hemi
i get what yall are saying but i would figure more pressure would help some since they are built for it

Pretty sure mine have a max of 80 PSI. Cold and unloaded I'm at 38 PSI, which is probly close to 40 when warm, and to pull the stock trailer I bump them up to 45ish if I have the time beforehand. Being "built for" 80 psi means they won't blow up, that doesn't mean that you are actually supposed to put that much in them.

My old tires were larger (larger tires run lower psi), I ran them at 30-33. My new ones are a different size so I started at 45, rode terrible so dropped to 42, still bad so now I'm at 38. I may try 36 in the future but you just have to know what it should feel like and what you need to do to get there.
 

Daw14

Senior Member
Joined
Nov 29, 2017
Posts
3,416
Reaction score
5,451
Location
South Florida
Ram Year
2014
Engine
5.7 hemi
Rear control arm bushings are very mushy from the factory.
There are lots of aftermarket that improve the ride
.
I went with Clayton /Thuren, these are
Like night and day ,compared to stock.

They are not listed for Rams ,but Gladiator parts are the correct size. And fit spot on, heavy as could be.
 
Last edited:

rotwiler

Senior Member
Joined
Oct 20, 2017
Posts
1,019
Reaction score
517
Location
Washington
Ram Year
2021
Engine
5.7
I have a 21 Bighorn 4x4 5.7 qc. 285/60/20 LT and I keep them at 37. When towing my 7k trailer they are perfect, when hot they go up to 40-41.
 

Bigskyroadglide

Moderator
Staff member
Member Relations Specialist
Moderator Supporting Member
Joined
Nov 9, 2016
Posts
2,742
Reaction score
5,841
Location
Montana, officially RETIRED
Ram Year
2014
Engine
Hemi 5.7, supercharged
My recommendation, the chalk test. Buy or obtain some chalk for your tires, mark the tread see what stays or comes off, adjust your pressure accordingly. I didn't believe it, till I tried. Amazing common sense . Less that 5 minute vudeo

 

CanuckRam1313

Senior Member
Supporting Member
Joined
Aug 29, 2022
Posts
3,199
Reaction score
7,883
Location
Ontario Canada
Ram Year
2023 Warlock
Engine
5.7
For my summer set up I run LT295/65R20's in Range E on my stock Warlock 20x9 rims and adjust the tires to 40psi cold checked.

This is my daily drive psi for these tires and it provides perfect full tread contact with zero abnormal wear and a comfortable ride at all times.
 
Back
Top