Missing 4th Gen ram Power fold mirror thread?

[Mpgrimm2]

Anyone know where my thread went? ... A lot of time/years of info updated into that one thread!

- DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes

Thanks
Mike G.

@Shaggy , @MADDOG , @Griffin

 

[G-Ride990]

I found it. We are creating a new sub for how-to/knowledge base. We moved a ton of commonly posted questions/threads to a hidden section until we are ready to roll it out.

I'll put it back where you want it for now, we aren't quite ready for the new section just yet.

Let me know where you want it and I'll move it back.

Previously it was in this section: DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes

 

[G-Ride990]

I just put it back for now.

DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes

I'm gathering my notes and info from around the forum for those looking to upgrade their exterior side mirrors (Regular and Tow). Please feel free to post any info you know/can confirm and I will update the first few posts of the thread... Recommend you contact forum vendor @AllMoparParts.com...

www.ramforum.com

 

[Mpgrimm2]

Thanks ... I was getting forum and email messages about it missing. There's a bunch of threads I keep track of ...

 

[Mpgrimm2]

- M² Mods Intro

** AlfaOBD (for activating factory features yourself. See Docs linked in OP )

-----------

- DIY: 2017-19/20 classic Overhead Mic and Compass harness install

- DIY: Add 2013-2018 OEM Foglight Wiring

- 5th Gen 2019+ Foglight Add-on harness

-----------------
- DIY: 2013-2018 RearView Mirror Upgrade & Harness install

>> DIY: 2013-18 (19 classic) Power Fold Mirror upgrade/Notes <<

- DIY: 2013-2018 OEM Steering Wheel Audio Control Install

-------------

- 2013-2018 RA2/VP2-NA Radio Notes

- DIY: 2013-2017 RA3/RA4 8.4" Radio Upgrade/HVAC Conversion

- INFO- 2013-2018 8.4 FW Notes (RA4/VP4 & UAx NA)

- ROLL-UP INFO: FOTA 18.11.x & uC D/L 18.45.01 SW Update 13-17 RA3/Vp3-NA & Ra4 VP4-NA

--------------------

- How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

- HVAC problem with UAS upgrade

- How to Add Automatic Temperature Control (ATC) to a Manual Temperature Control Truck

- FIX > 2013-18/classic 4th Gen USB Hub ... Battery to Keyed Power (For AA/CP wireless adapter)

--------
- How-To: Add Heated/Ventilated seats and Heated Wheel to Express/Tradesman


- Installing OEM backup cam

- Post 1165/1166: My 13Ram Front cam install

- kad 's front camera on Cargo Cam input thread

- JB1's - Post your Front Camera Link

- Littlebiscuit’s – Cargo Cam Install (w/aftmkt Crux Cam)

----------
CircuitGuys - List of desired 4th Gen Mopar options and part numbers.

- Mpgrimm2's Cellphone and Hidden Power setup

- DIY - Truxedo Sentry Review/Latch Mod on 5th Gen Ram 1500 w/Rambox & videos

- DiY: 5th Gen 1500 DT Mirror Cover & Grill Swap (partial blackout)

... I think that's it

 

[G-Ride990]

Thanks ... I was getting forum and email messages about it missing. There's a bunch of threads I keep track of ...

Sorry about that, let me know if you are missing any of those others and I'll move them back. We did not mean to step on any toes or cause problems for our vendors/long time and respected members. The new how-to/Knowledge base is going to look great we think. We just need a little more time to get it implemented properly.

 

[MADDOG]

So what do you think about moving those threads to the new Ram Forum Knowledge base, Mike?

Ram Forum Knowledge Base

 

[Mpgrimm2]

I have some thoughts that may be best done directly

 

[MADDOG]

I don't understand your answer to the question. Can you be more specific?

 

[Mpgrimm2]

Sorry for the delay, but I thinking it might be better to catch up directly/send a message.

My initial reaction is not in favor of it, especially if any of the threads I linked above that are moved there are locked with no further replies possible. (I'm with @Wild one on that)

Some of the threads may be older, but there are still those of us that monitor /reply to them and provide support still (time permitting)

I honestly think it would be easier if there was a select user group that had the ability to update/edit their posts and especially original posts at the beginning of threads to help keep them up to date as new info is found.... Vs digging though threads (I can as a vendor, but it seems like regular contributors should as well).

I'd rather see an index of sorts with links to the most useful/knowledge base type threads. (Which is why I keep that list in an email ready to go).

 

[Wild one]

I agree @Mpgrimm2 ,the idea of a "sticky" section is actually pretty good,but the fact it becomes "locked" after being moved there,kind of defeats the purpose of the section,as it can't be updated or corrected

There also seems to be no rhyme or reason to which posts get put there

 

[MADDOG]

@Mpgrimm2 Mike, We will leave your specific articles where they are as you requested.

@Wild one There are provisions for additions, changes or updates to Knowledge Base articles as described here:

Knowledge Base Submissions

 

[Wild one]

@Mpgrimm2 Mike, We will leave your specific articles where they are as you requested.

@Wild one There are provisions for additions, changes or updates to Knowledge Base articles as described here:

Knowledge Base Submissions

Seems a bit complicated to me MD. Just my .02 though