Muscle cars

[Eddie S]

1995 Chevrolet Caprice 9C1 Police Package New York Through way Supervisors car.
120,000 miles
Cloth interior
Bucket seats
Drivers side 5 way electric
12.89 1/4 mile pass Atco Raceway (Low 13 second passes usually)
355 LT1 Corvette Engine (Factory 350 30 Over balanced and blue printed)
10.5 / 1 compression
LT4 Hot Cam 1.5/1.6 staggered roller rockers
Edelbrock aluminum heads
Factory HD Police package rear end
4:56 Eaton posi Ford posi additive
Long tube headers
Flowmaster 10 series racing mufflers
Electric cutouts right after header collectors
5% tint
Factory 9C1 Wheels and center caps
Rear wheels widened to 15X10
Tremec 6 speed
Hurst short throw shifter
Drive Shaft Specialties Aluminum screw
Spicer U-Joints

 

[MikeG71]

View attachment 200020

1995 Chevrolet Caprice 9C1 Police Package New York Through way Supervisors car.
120,000 miles
Cloth interior
Bucket seats
Drivers side 5 way electric
12.89 1/4 mile pass Atco Raceway (Low 13 second passes usually)
355 LT1 Corvette Engine (Factory 350 30 Over balanced and blue printed)
10.5 / 1 compression
LT4 Hot Cam 1.5/1.6 staggered roller rockers
Edelbrock aluminum heads
Factory HD Police package rear end
4:56 Eaton posi Ford posi additive
Long tube headers
Flowmaster 10 series racing mufflers
Electric cutouts right after header collectors
5% tint
Factory 9C1 Wheels and center caps
Rear wheels widened to 15X10
Tremec 6 speed
Hurst short throw shifter
Drive Shaft Specialties Aluminum screw
Spicer U-Joints

I bet the Police Force WISHED their cars would have been built like that. LOL!

 

[Ram Wagon]

i wanna go fast.

 

[thestuntboy]

70 Cuda getting a rewiring and engine change right now. Hope to have ready by end of summer.

 

[sawman556]

 

[HemiLonestar]

Love those 5 spoke HC2 wheels vs the HC1's. Blower whine is in my future once I pay some things down and trade the Charger in (just a matter of whether it has 2 or 4 doors).

 

[Dan Topp]

My C6 currently on its third build the f1c belts gave me a lot of trouble at only 14lbs and I liked the look of the extreme widebody kit by supervettes and was told a twin S/C will be better so the 12 month body/paint job is almost done,the engine was resleeved and a upgraded rear end has been gathering dust so here’s the before blower build 840rwhp.

 

[Dan Topp]

The before bodyof the 08 z06 at rantoul airport 1/2 mile shootout 173

 

[Dan Topp]

Currently at the mercy of the painter

 

[thestuntboy]

Starting engine install the hard way but when your not mechanically inclined wife is the only help. Ebodies have so much room to work with........not.

 

[HemiLonestar]

Starting engine install the hard way but when your not mechanically inclined wife is the only help. Ebodies have so much room to work with........not.

Plenty of room, same amount as a B body lol......could be worse, you could be wrenching on an A body.

 

[thestuntboy]

Plenty of room, same amount as a B body lol......could be worse, you could be wrenching on an A body.

My Roadrunner had a 383 and I swear there was more room for the headers but chrysler engineers did like to squeeze.

 

[Dan Topp]

I will only say that I never would of dumped part of my modding fund into my wife’s 19 ram 6600 lb.4x4 but it was such a slug, out of boredom I bought the D1SC kit and it’s better but with a **** kit and a trans tune it’s due one more Dyno session.heres a few pics.

 

[HemiLonestar]

My Roadrunner had a 383 and I swear there was more room for the headers but chrysler engineers did like to squeeze.

I had a 72 RR with a 400 and I put big tube Hookers in it, can't remember if I needed to pop the mount on each side or not but they cleared everything.

 

[rod from md]

not a fast muscle car..more of a nice driver /cruiser. After years of dumping money into numerous cars to chase some magical end, which i never seemed to get to, ive settled on a driver friendly classic...70 cutlass 350/350 . still gets thum bs up wherever i go and almost never had to work on it since i finished getting it together... still miss that "rush" of massive acceleration but the ram keeps me amused

 

[Gamedog]

Here's my 1970 Dodge Dart Swinger...

Originally a slant 6 car, now has a 408 stroker I built along with all kinds of other fun stuff. Full Hotchkis TVS system for suspension...



Fun ride for sure

 

[Mike Townsend]

the most recent ones are all Charger's. I started with a new 2013 Charger R/T Road and Track. Traded it in on a 2015 Charger SRT 392 in Jazz Blue. Only car I have ever ordered which was kind of cool. Only 38 made in that color that year. I just traded it in in April on a 2017 Charger Hellcat with 14K miles. man the 392 had enough power but this thing is too much fun.

 

[pacofortacos]

I had a 69 GTO Judge original black exterior, 4 spd, Ram air III - I should have kept it, the black was pretty rare.

I still have, currently as a bench it appears in the garage a 1971 Cuda originally 383, 4spd, B5 color. It's one of a few hundred.

I really need to build a garage

 

[HemiLonestar]

man the 392 had enough power but this thing is too much fun.

You know the old saying, too much is just enough lol...now you can trade up to a Charger Redeye lol.

 

[Pull Ya]

I know all these newer cars are fast and sleek and and and, but there's just something about them old-style muscle cars, the Goats and Chevy and Dodge's---Grumpy, Sox and Martin, Glidden etc etc etc. maybe I'm just old-----
Jay

https://www.facebook.com/groups/futuresonics55chev