Power247
Senior Member
- Joined
- Jul 26, 2012
- Posts
- 5,615
- Reaction score
- 947
- Location
- High Point, NC
- Ram Year
- 2019
- Engine
- 6.4 HEMI
I finally set aside some time to start my first projector retrofit. Given all the issues I read about guys having trouble opening up their factory lights I decided to leave my stock quads alone and picked up a set of black and clear Depot lights from Amazon. Paint and supplies were ordered through Ebay. The V3 projectors and the rest of the lighting components came from DDM Tuning. <fingers crossed>
Oven set to 210* for 8 mins to loosen things up and back in for 5 more mins and they came apart real easy.
3 coats of auto grade primer
2 coats of True Blue Pearl
Clearcoat applied and cured
Projectors installed
Its been raining on and off all day so hoping for better weather tomorrow so I can wire in the HIDs and give these babies a test run before sealing them up.
Oven set to 210* for 8 mins to loosen things up and back in for 5 more mins and they came apart real easy.
3 coats of auto grade primer
2 coats of True Blue Pearl
Clearcoat applied and cured
Projectors installed
Its been raining on and off all day so hoping for better weather tomorrow so I can wire in the HIDs and give these babies a test run before sealing them up.
Last edited: