Need some help with 4" pics!

[Informal]

Nice setup ! What's your wheel specs ? Do you have spacers / wheel adapters ?

No spacers


20x9 -12 Rockstar XD2's
35x12.5 Nitto Trail Grapplers

 

[PDXRam]

Read some comments in the beginning of the thread...just as an fyi - I'm running 35x12.5x18 on a leveled 2016 1500 with no problems at all!

 

[CMil527]

4 inch Mopar lift
35x12.5

No issues, no rubbing.

nice looking set up!

 

[Informal]

Thanks, by far my favorite truck ever!

 

[dh0521]

What did you end up doing? I just got a 2016 crew cab and im thinking about getting a zone 4" with 35s.

 

[PDXRam]

What did you end up doing? I just got a 2016 crew cab and im thinking about getting a zone 4" with 35s.

I'm thinking about a 4" zone too. Do you install it yourself? If not how much will you pay for it with labor and alignment. I have a quote at $2390 all in all. Don't know how good of an offer that is.


Sent from my iPhone using Tapatalk

 

[6.7CumminsDrvr]

I'm thinking about a 4" zone too. Do you install it yourself? If not how much will you pay for it with labor and alignment. I have a quote at $2390 all in all. Don't know how good of an offer that is.


Sent from my iPhone using Tapatalk

Replied in the other thread..........$1637.99 (lift, install, alignment) out the door:

 

[JB1]

Question for the 4" lift owners....what's the overall cab height (sharkfin if you have one)?
Just curious if I could park in garage after 4" lift/35's

 

[PDXRam]

Question for the 4" lift owners....what's the overall cab height (sharkfin if you have one)?
Just curious if I could park in garage after 4" lift/35's

This is a good question. I'm interested too.


Sent from my iPhone using Tapatalk

 

[Duhhsteedohh]

Replied in the other thread..........$1637.99 (lift, install, alignment) out the door:

Where did you have that done at?


Sent from my iPhone using Tapatalk

 

[6.7CumminsDrvr]

Question for the 4" lift owners....what's the overall cab height (sharkfin if you have one)?
Just curious if I could park in garage after 4" lift/35's

This is a good question. I'm interested too.

I'd have to measure to get numbers but mine fit in the garage and the parking deck downtown.

Where did you have that done at?

Mild 2 Wild 4x4 Customs in Powder Springs, Ga



Shot in the garage:

 

[darkknight]

If you look at my sig picture i'm running 34's on a Zone 4 inch lift.

 

[6.7CumminsDrvr]

So I took some measurements and here's what I've got:

Standard 7' garage with 83.5" of usable height

2" clearance sharkfin to garage header

1" or so clearance sharkfin to flexible rubber piece hanging down

As for my truck:
Front= 4.7" (4" with Bils set @ .7")
Rear=3"
Tires = 34.5" (spec per BFG site, not actual height on truck though they spec out height wise close to what most 35's do)

Wish I pulled the truck in a bit further so the fin would be directly under the rubber price hanging down but aside from the angle of the pic, my truck has PLENTY of clearance. My radio antenna does hit but who cares..............I use that as my warning indicator when in parking decks!

 

[JasonK94Z]

295/60-20 (34's) on 20x9 wheels. Bilsteins at 2.8" only.


Sent from my iPhone using Tapatalk

 

[JB1]

So I took some measurements and here's what I've got:

Standard 7' garage with 83.5" of usable height

2" clearance sharkfin to garage header

1" or so clearance sharkfin to flexible rubber piece hanging down

As for my truck:
Front= 4.7" (4" with Bils set @ .7")
Rear=3"
Tires = 34.5" (spec per BFG site, not actual height on truck though they spec out height wise close to what most 35's do)

Wish I pulled the truck in a bit further so the fin would be directly under the rubber price hanging down but aside from the angle of the pic, my truck has PLENTY of clearance. My radio antenna does hit but who cares..............I use that as my warning indicator when in parking decks!

Thanks that's great

 

[miguelherrera4]

bilsteins set at 2.8 with a 1.5" rear spacer with 35" trail grapplers no rubbing

Sent from my Nexus 6 using Tapatalk