Does anyone know, or can clue me in on how to find the exact rails I need to install a bakflip on a 5'7" rambox bed. I ask because I have been going back and forth with a custom shop & the local dealership for almost a month now with no luck.
We gave the dealer the VIN, and they stated that the truck did not come with rails from the factory, but there were only 2 types. Two special orders and two trips to the shop later, and neither will work.
I've asked bakflip directly, and they told me the same thing, so no luck there either. Really close to just calling it quits.
EDIT
I tried searching the site before I posted this, but had no luck finding what I was looking for. However when searching the internet just now I found a post dealing with this exact issue.
https://www.ramforum.com/threads/help-in-figuring-out-rambox-rails.77652/
There is the link if anyone is interested. Feel free to close this thread, etc.
We gave the dealer the VIN, and they stated that the truck did not come with rails from the factory, but there were only 2 types. Two special orders and two trips to the shop later, and neither will work.
I've asked bakflip directly, and they told me the same thing, so no luck there either. Really close to just calling it quits.
EDIT
I tried searching the site before I posted this, but had no luck finding what I was looking for. However when searching the internet just now I found a post dealing with this exact issue.
https://www.ramforum.com/threads/help-in-figuring-out-rambox-rails.77652/
There is the link if anyone is interested. Feel free to close this thread, etc.
Last edited:
