OPT7 HID lows and fogs insatalled

[bigolayne]

That's what the resistors are for my friend. Depending on your year will depend on the number of resistors required. 2015=2 resistors for each bulb(low/high). Low+high=4 resistors.
If you are doing an upgrade like me from quads to oem projectors(tyc version) it would be 2 for the lows, 2 for the highs and 2 for the turn signals. The only ones actually connected to the relay harness, requiring 2-1 for the lows and 1 for the highs, would be the factory harness.
It really is simple and just a matter of mounting the resistors...

 

[Limeybastard]

My Ram after hid install and all those resistors.

Sent from my SM-N910T using Tapatalk

 

[Drummin4jc]

My Ram after hid install and all those resistors.

Sent from my SM-N910T using Tapatalk

LOL!

Adam

 

[bigolayne]

Limey you are hilarious

 

[SilverStreak88]

My Ram after hid install and all those resistors.

Sent from my SM-N910T using Tapatalk

Should buff out...

 

[Rzrman328]

I'm surprised my ram doesn't look like that....I have wires all over the place.

**** must be hooked up right somehow.

 

[fordtech90]

I started reading this thread with intentions on doing this mod. After reading it however I'm just gone stick with my ZXE bulbs

 

[bigolayne]

It looks difficult but it is so simple. When I first started with this I would have never thought I could do this and now I'm damn near an led and hid expert. I've researched, experimented, modified and made so much crap my friends don't buy bulbs anymore; they come to my house and go through my lighting box.
I am a disabled vet with time on my hands so I sit in my garage and read how to do it and then do it. After it works I clean it all up and see how it works. After about a week or so, on to the next set.
It may look hard but it's not...


Sent from my iPhone using Tapatalk

 

[Bcountry]

Exactly the wiring harness looks like a damn mess but you get the idea after you lay it out and see what your working with. Its many Youtube videos that will help with the install also. And we as a RAM truck community are here to help as much as we can.

 

[Limeybastard]

I started reading this thread with intentions on doing this mod. After reading it however I'm just gone stick with my ZXE bulbs

I don't blame you man, all that reading and methods of install has made me ill. Lol

Sent from my SM-N910T using Tapatalk

 

[Limeybastard]

The other thread on another forum I'm keeping my eye on..

http://www.jeepgarage.org/f176/2015-altitude-hid-kit-conversion-help-93519-2.html

Wrongs thread. Sorry.

Sent from my SM-N910T using Tapatalk