P0133 after Header install

[diymirage]

looks like this comes up from time to time, i just had some long tube headers with "high flow" cats installed, and now i got the P0133 (02 sensor 1/1 slow response)

can i use alfaOBD to delete the "error warning ON requested" path ?

 

[Bigskyroadglide]

I have this come up from time to time on my 14 RT. I've replaced both O2 sensors over time with Mopar units, so I know it's not the sensors as they work fine for a while and on my scan tool you can see them active.

Now I just Clear the code and see if the sensor are adjusting properly. If so, I move on. It's only if they come back immediately that I'm concerned.

 

[diymirage]

it came on about 20 miles after the headers were installed, 3rd or 4th start up

i cleared it with alfaOBD and put another 30 miles on it (and again 4 start ups)
so far it is off, but if it keeps coming back its going to annoy me

 

[Wild one]

it came on about 20 miles after the headers were installed, 3rd or 4th start up

i cleared it with alfaOBD and put another 30 miles on it (and again 4 start ups)
so far it is off, but if it keeps coming back its going to annoy me

O2 Simulator Mini Cat Cel Fix stainless steel Rear O2 sensor simulator.

O2 Simulator Mini Cat Cel Fix, Big Daddies Garage Mini Catalytic Convertor Rear Oxygen Sensor Simulator is the best and easiestway to clear p0420 / p0430 codes for bad or missing catalytic converters. Just screw it the o2 simulator mini cat into the existing exhaust then srew in the oxygen...

www.bigdaddiesgarage.com