Pics of lifted trucks

[Cruizer]

Loving the truck cruiser. Got the same setup in my truck and I'm very happy with the height. Now we just need to bigger/ wider tires...hahaha.... I'm not changing the rim...just getting the next size higher and more aggressive tires.

Sent from my DROID RAZR using Tapatalk

Thanks!!

With the 3" BL, I'll be installing 20x10 black wheels with either -12 or -24 offset. Tires will be LT325x60R20 Terra Grapplers. Can't wait to get this on the truck. Have to get through the holidays first.

 

[Diminus]

thanks guys, 2012 ram sport fully loaded, 6'' rcx lift, 1.25'' rcx body lift, pro comp adjustable shocks set at 2.75 and 1.75 tgc rear spacer to achieve the 10'' lift. tires are 37x13.5x20 toyo open country on 20x9 fuel hostage -12 offset. lookin to get some 20x12s soon, mufflex 14, k&n intake, trinity t1000 with custom tunes, catch can, amp power steps, spyder tail lights, and LOTS AND LOTS OF GAS LOL

hey i got a set of bilsteins sitting in my porch, ordering the RCX 6 inch for myself for xmas, gonna install next summer due to we got a foot of snow up here now..., currently got the rcx 3.75 combo lift so i already have the 1.25 body lift installed. my question is. what is your gear ratio. im running 35s with 3.55 gears, you swinging those 37s fine on these gears?

 

[fastNugly]

hey i got a set of bilsteins sitting in my porch, ordering the RCX 6 inch for myself for xmas, gonna install next summer due to we got a foot of snow up here now..., currently got the rcx 3.75 combo lift so i already have the 1.25 body lift installed. my question is. what is your gear ratio. im running 35s with 3.55 gears, you swinging those 37s fine on these gears?

Let me know if we can help you with that RCX lift

as for 3.55 and 37's….You will hate your truck.
I ran it like that for 2 weeks before swapping out the gears. But back then, there were no tuners for the 12's yet
But a tuner will only mask the problem.

Id stick with 35's at the most

 

[Diminus]

does anywhere sell the gear kits with the carrage yet. dodge really SH!$ the bed when they built the 2012s, who the hell does that so you cant do a simple gear change, pissis me off so much

 

[fastNugly]

does anywhere sell the gear kits with the carrage yet. dodge really SH!$ the bed when they built the 2012s, who the hell does that so you cant do a simple gear change, pissis me off so much

At this point, there is no simple bolt in
You will need to machine the rear carrier to fit aftermarket gears unless you go with the stock 4.10, but then you will need a front carrier from an 09-11

Not an easy job, but it is doable.

 

[daviddup78]

well hmm my truck came stock with the 3.55 gears, and the dealership but 295/60R20 Nitto trail tires and those rims, they are heavy I wonder if i strip the pinon gear in my rear if they will put me 3.92s lol

 

[Diminus]

i wish i had 4:10 gears, so i could swing 37,13.50s im going to have to do something, if this truck wants to stay, if not im getting a 2500 and lifting it to the friggin moon

 

[fastNugly]

well hmm my truck came stock with the 3.55 gears, and the dealership but 295/60R20 Nitto trail tires and those rims, they are heavy I wonder if i strip the pinon gear in my rear if they will put me 3.92s lol

Yes, 295's are heavier than stock, but no where near what 37's do to a truck with 3.55
37's seriously dog down a ram with 3.55. I know and witnessed this first hand with mine.

From dead stop to go is horrible (especially if you want to floor it), the climbing of small hills on the freeway and the roads will down shift your truck many times, towing? For get towing

As said, 35's is the max I would ever recommend on a ram with 3.55 and that is with a tuner.
Anything more, you'll hate your truck.
Plus all that strain you will put on your gears and tranny

 

[Rappywade]

Hey guys first time caller ,long time listener lol anyhow here is a few pics of my truck installed everything myself on the back lawn. I have the 3.92 gears and the truck goes along nicely and can even spin those 37's on the dry saulty pavement of newfoundland. But I do have a few mods.

Lift:
rcx 6 inch, bilstines at 1.4, 1"rear coil spacer
performance:
varaham intake, moe's 87mm superchips cortex 91 tune with trans tune, sonnex line pressure booster , mangaflow 16869 with sport rear bumper color matched (somewhat lol)

 

[Rappywade]

threw some hids in today and tinted the fogs with 35% . It was -12 c today in newfoundland so it was a pain without a garage lol

 

[sausec17]

nice truck brother!!! gotta love our trucks on 37's!

 

[Airmen43]

2012 ram 1500 cc

Sent from my SCH-I545 using Tapatalk

 

[Caldwell]

Airman43 - truck looks nasty !

especially the light bar up front.

 

[Thor09]

Good lookin trucks!

 

[Rappywade]

thanks! its more of a pavement queen. Airmen-43 sick lights/bar set up!

 

[Cruizer]

Those are a couple bad ass trucks!

 

[Rappywade]

Thor09 I think a set of color matched mopar strips would look bad ass on your truck

 

[Djeazie]

2012 ram 1500 cc

Sent from my SCH-I545 using Tapatalk

Beautiful truck sir! What brand and model light bar is that? Wanting one for my 13 Sport but can find any.

 

[Thor09]

Thor09 I think a set of color matched mopar strips would look bad ass on your truck

So do I. That might be a spring project.

 

[White Beauty]

Not sure if ive posted mine here yet. 35x12.5 3" BL. 2.5 front spacer and 1.25 rear.

2 of the pics are because a random guy parked right beside me and I had to snap a couple!