Power mirrors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Picinisco

Junior Member
Joined
Feb 9, 2018
Posts
21
Reaction score
2
Location
Gilbert, AZ
Ram Year
2005
Engine
5.9l Cummins
My 2005 dually mirrors wont adjust. When pressing the switch, they seem to me trying to move but can't. This would indicate there is power but what should i check. The switches or the motors or both.

John
 

kad

Senior Member
Supporting Member
Joined
Jul 10, 2017
Posts
2,788
Reaction score
2,331
Location
Hudson Valley, NY
Ram Year
2014
Engine
5.7L HEMI
If they're trying to move then it doesn't sound like the switch, but both of the motors dying at once? That's unlikely. If you were anywhere near me I'd think they were frozen, but not likely if your profile is correct and you're in AZ. :) The switch is probably the best place to start checking.

-K
 
OP
OP
Picinisco

Picinisco

Junior Member
Joined
Feb 9, 2018
Posts
21
Reaction score
2
Location
Gilbert, AZ
Ram Year
2005
Engine
5.9l Cummins
If they're trying to move then it doesn't sound like the switch, but both of the motors dying at once? That's unlikely. -K

Since I just bought the truck yesterday I've no idea how long the mirrors have been bad. The seller said he just adjusted them by hand. So I will check the switch first before removing a mirror to bench test it.

John
 
Back
Top