Power Wagon lift springs, shocks, trackbar, links

[reloaderguy]

FS in the PNW: 2016 Factory Power Wagon linear rate 2" coils, Bilstein shocks, front Power Wagon track bar (+1/8"), and rear sway bar end links. This is the factory 2" suspension lift that comes on a Power Wagon. This will fit 2014+ RAM 2500 gas trucks and will provide approximately 2" of lift. These were on the truck 3500 miles before switching to custom suspension. I fit 37" tires with trimming but 35" will fit with little to no work (wheel offset up to +18).

$500 for the package. The parts are located in Central OR. I will deliver to a major city in the PNW of your choosing (OR, WA, ID, MT) with scheduling otherwise buyer pays actual shipping. Face to face transactions are cash only. THE SUSPENSION HAS BEEN SOLD!

 

[Mopar_Magic_Man]

Good deal!

*This message was sent from the exhaust of 6.4L Hemi...

 

[Racerx26]

You fit 37s on a 2 inch lift!?

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Mopar_Magic_Man]

Power wagons have a different offset wheel don't they? That might help some.

*This message was sent from the exhaust of 6.4L Hemi...

 

[reloaderguy]

I haven't been getting notifications for this thread so I forgot about it. Yes, 37's with a 2" lift. Power Wagons do have unique wheels to the trim level but they are the same offset as a standard RAM 2500/3500SRW wheel. There are tons of PW owners who run stock wheels with 37's. I think 35's are an easier fit but 37's are certainly doable with a little effort.

Here is the truck with 37's before I changed the suspension. Again, OE +2" linear rate gas coil, PW 39.125" trackbar, longer rear links to prevent swaybar inversion, and corresponding Bilstein shocks. This is an excellent deal for a 2014+ RAM 2500 Hemi owner who wants a moderate lift with a softer ride using OEM parts.

 

[BeanRAM]

Very nice looking truck!


Sent from my iPhone using Tapatalk