PPE Transmission Pan

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wild one

Senior Member
Joined
Jan 17, 2016
Posts
23,964
Reaction score
55,308
Ram Year
14 Sport
Engine
5.7
Like you, I also have the bypass kit, it's sitting on my workbench. My truck is just hitting 70k miles, so tranny service is due anytime.

I like the thought of the extra fluid in the pan. I plan on using this method of refilling the trans, where they keep the truck level, with all wheels off the ground. In that linked vid, they also loosen the tranny mounts.

I'll be using my 4-post lift, and will be raising the rear at least enough to get the rear wheels off the ramp, so I'll be ~halfway up to the 'green sheet' specified height.
 

Buddy

Senior Member
Joined
Apr 13, 2014
Posts
2,195
Reaction score
1,018
Location
Ottawa, Ontario - cool town
Ram Year
2014
Engine
Hemi 5.7

RamDiver

Senior Member
Joined
Jan 23, 2022
Posts
5,824
Reaction score
12,323
Location
Marlborough, Ontario Canada
Ram Year
2021 DS
Engine
Hemi 5.7
So everyone reused the collars from the plastic pan over to the PPE pan holes as well?

From everything I've learned and seen in videos, moving the pan bushings to the new PPE pan is the SOP.
Also, installing them flush on the exterior side allows the gasket to be located and aligned more easily.

A couple of videos have missed this part of the installation. Easier is better in my books. :cool:

.
 
Back
Top