Quick Question

[UneasyJmitchell]

Ive lifted the Ram with a 2.5 inch level. Will it take 35x12.5x20 (stock rims) without rubbing? If I do the 1/4 inch spacer, do the spacers go ONLY on the front, or do I need four of them? Thanks.

 

[BMD]

Will likely need 1/4 spacer on front but would use on all to make even, just like things to match, go 295:65:20 and it is 35.4 tall and lil under 12" wide and no need for spacers. If you decide you need spacers I have a brand new set of 1/4" spacers I would sell all four to you. Good luck

 

[h2oman]

A few guys I know of have managed 295's on stock. Not very many. You're gonna need spacers on 35's.

 

[colby81888]

I have a 2.5 leveling kit. I had the stock 20's and mounted 35x12.50x20 cooper discover stts. They didnt rub ( they were super close the the a-arm) i ended up putting 1/4 inch spacers on front and back though after a week of driving.

 

[UneasyJmitchell]

@BMD--How much for the spacers and are they a large disc with holes for the lugs or are they individual small 1/4 inch pieces that would just fit over each lug?

 

[UneasyJmitchell]

OK, Ive seen the spacers. Question is now, will the normal lugs still be OK with only the 1/4 inch spacer in there? I have a million more questions, LOL. I am reading tons of these threads and getting some answers. Thanks for all the help.

 

[Sladerade]

Here are trail grapplers 295/65/20 with stock rim NO spacer. Yes they rubbed at full lock. I only ran them for 2 months then changed rims.