6_4Hemi
Junior Member
The transmission pan was punctured and replaced.Drove it half a mile down the road without oil pressure thinking it might need to build up.The pickup tube was bolted up,it wasn’t tight enough or something.I took it to a mechanic not a machine shop and said it would most likely need a new motor.The mechanic didn’t look at the cylinders or anything on the inside of the block.Do I need a new engine or is it worth trying to bring it to a machine shop to have it rebuilt.The shavings in the pan are from the pick up tube.I only drove it a half mile then turned it off and has only been towed around since then.This happened in the transmission pan not the engine pan for people who are confused
Attachments
Last edited: