So I may have gotten a little carried away and went a little more than 2" on both sides and was wondering if there will be any problems with stock shocks. Specs were:
Driver Side-
(Before) Front 36-1/2", Rear 39-1/4"
(After) Front 36-1/2", Rear 36-1/2"
Passenger Side-
(Before) Front 36", Rear 38-1/2"
(After) Front 36", Rear 36-1/4"
I ended up cutting more than a coil and a half on both with a 4in angle grinder and took it for a test drive and all felt pretty smooth but didn't want to get to crazy for fear of dropping the springs. Any feedback is greatly appreciated.
Driver Side-
(Before) Front 36-1/2", Rear 39-1/4"
(After) Front 36-1/2", Rear 36-1/2"
Passenger Side-
(Before) Front 36", Rear 38-1/2"
(After) Front 36", Rear 36-1/4"
I ended up cutting more than a coil and a half on both with a 4in angle grinder and took it for a test drive and all felt pretty smooth but didn't want to get to crazy for fear of dropping the springs. Any feedback is greatly appreciated.