Rear Control Arm Bushings

[SilverRam1500HTX]

Hello Everyone,
New to the forum and thought I would give this a shot as Ive been searching and searching. I have a 2020 ram 1500 etorque with a 12" FTS suspension lift on 42s. I got the lift roughly in 2023, truck sat for a bit while I rebuilt the motor (lifters will get ya). I have been searching high and low for replacement bushings for the rear control arms and am coming up short everywhere. Full throttle only goes through specific off road shops and I dont feel like paying over $500 for bushings alone. Any advice?

 

[Bigskyroadglide]

Buy new control arms. Core 4x4, Apoc freedom, Clayton. Many options.

 

[Daw14]

I got Clayton’s , listed for a gladiator.

These are fantastic arms ,the are as strong and stout as one could desire . They tightened up the squishy feel, and eliminated wheel hop.
Lots on here have the core 4x4 also , but having the Clayton’s I’m extremely satisfied.
Nothing good comes cheap, so prepare for the cost.

Use our search engine to find more info about these , I rread a lot , which helped me to decide on these.

 

[SilverRam1500HTX]

Wanted to update on here. I was able to find the exact bushings I needed at Probearing, they give the dimensions and everything before you buy them. I spent less than $100 on all the bushings and had everything done within an afternoon. So if anyone runs into the same issue I highly recommend them.