13bighorn1500
Junior Member
I have read different difficulties with the remote start not working and my remote has different issues
1-I Start truck manually in morning with key and warm up engine, turn off and lock doors
2-Late in same day I press 2x remote twice running lights flash twice and trucks starts. I put key in and turn on, then turn off and lock doors.
3-Next day I push 2x remote twice and running lights flash only once, I push lock and try again and same results.
4-Enter truck and dash message "Remote start disabled, use key to start"
5-No other warning lights, I connect ob2 code reader and there are no codes
I just don't understand why I can use key to clear "Disabled Remote message" then exit truck, lock truck and walk away and remote start will work for immediately and rest of that day, but it will not work the next day??
I installed a new battery in truck and both key fobs, tried to remote start standing 3 ft away next day with no luck?? all other functions on both key fobs, lock, unlock and panic work with no problem when remote start enabled and disabled.
Has to be issue with truck computer? I don't need to use remote start often, but it is frustrating.
Could anyone give me advise, or is this an issue that needs to be serviced by a dealer?
Thanks!!
1-I Start truck manually in morning with key and warm up engine, turn off and lock doors
2-Late in same day I press 2x remote twice running lights flash twice and trucks starts. I put key in and turn on, then turn off and lock doors.
3-Next day I push 2x remote twice and running lights flash only once, I push lock and try again and same results.
4-Enter truck and dash message "Remote start disabled, use key to start"
5-No other warning lights, I connect ob2 code reader and there are no codes
I just don't understand why I can use key to clear "Disabled Remote message" then exit truck, lock truck and walk away and remote start will work for immediately and rest of that day, but it will not work the next day??
I installed a new battery in truck and both key fobs, tried to remote start standing 3 ft away next day with no luck?? all other functions on both key fobs, lock, unlock and panic work with no problem when remote start enabled and disabled.
Has to be issue with truck computer? I don't need to use remote start often, but it is frustrating.
Could anyone give me advise, or is this an issue that needs to be serviced by a dealer?
Thanks!!