Reputable installers Northern VA
- Thread starter madweazl
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
- Joined
- Dec 19, 2017
- Posts
- 76
- Reaction score
- 80
- Location
- NOVA
- Ram Year
- '13 1500 | '16 2500
- Engine
- 5.7 | 6.4
I had Pro Trucks in Fredericksburg do the work and lets just say, extremely displeased is an understatement. This is the lower track bar hardware (finger tight)...
They told me it "needs to be aligned" and at first I was thinking, OK, maybe so. I left it in the driveway today and took the 1500 to work but when I got home I started inspecting things; I found the drivers side rear, lower shock hardware also finger tight. I got the track bar tightened up along with the shock but a front spring isn't sitting quite right in the cradle either (not a big deal but I'll address it in the morning).
I cant recommend this place and will contact them in the morning. Oh, the upper track bar hardware was about 100lb' shy of torque spec too.
They told me it "needs to be aligned" and at first I was thinking, OK, maybe so. I left it in the driveway today and took the 1500 to work but when I got home I started inspecting things; I found the drivers side rear, lower shock hardware also finger tight. I got the track bar tightened up along with the shock but a front spring isn't sitting quite right in the cradle either (not a big deal but I'll address it in the morning).
I cant recommend this place and will contact them in the morning. Oh, the upper track bar hardware was about 100lb' shy of torque spec too.
