sc 3865

[rocket]

Had a engine light come on recently, truck sat for a week. I was running a mileage excess tune, with 91 octane. Went too start it and the check engine light cane on. I went to work,15 miles. sat there for 2 days. When I returned I flashpaq'd a 91 tune, and adjusted my wot shift perameters.
Voila! light went out. Any rhyme or reason to this? I also checked for any codes, there were none, and nothing that needed clearing.
Superchips for the win!

 

[bigtigga84]

I think when you change tunes it wipes codes. I've noticed that before too. It may not come back on, but if it wasn't something tune related it should.

 

[rocket]

Well we will hope for the best,

 

[bigtigga84]

Lol right

 

[rocket]

I had my wot settings too low btw, They would shift, but then down shift again. I was thinking of short shifting and really getting the most out of the power band of the Hemi. It didn't work out to well. I have 2-3 at 5400, and 3-4 wot set at 5800. with a 6400 rev limiter. Sound good too you??

 

[LB3711]

next time read the code. I bet it will come back.

 

[rocket]

I dunno, What generally pops a code? With the mods' I'm sporting. Or what is the most code culprit?

 

[LB3711]

Doesn't have to be a mod. There just could be an issue. When it comes back read the code and post about it. We can see if it's a mod issue or an actual problem.


Sent from my AT&T iPhone 4.

 

[rocket]

so far so good

 

[KGBIGCOUNTRY]

Bill could be an Evap code mine tosses it sometimes during weather changes. Next time it pops just read it, mine is normaly a P0441.

 

[rocket]

Bill could be an Evap code mine tosses it sometimes during weather changes. Next time it pops just read it, mine is normaly a P0441.

Just keep flashing it? or is there a sensor too feed?

 

[KGBIGCOUNTRY]

The code will clear itself after a few key cycles but I have always just cleared it with the handheld. Next time it pops if it does read it and let us know.

 

[rocket]

no sweat, thanks