Snake Oil or not?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Burla

Senior Member
Joined
Apr 28, 2012
Posts
27,557
Reaction score
57,786
Ram Year
2010 Hemi Reg Cab 4x4
Engine
Hemi
Actually most of these are light cleaners in mineral oil with various petroleum distillates like napethenic solvents. Actually they generally do help lubricate upper cylinders. However, if the company doesn't supply a Material Safety data sheet which usually shows if it is a solvent or detergent, it is snake oil. I didn't see a MSDS.
 

audio1der

Senior Member
Joined
Jul 30, 2012
Posts
5,300
Reaction score
1,105
Location
Airdrie, Alberta
Ram Year
2012
Engine
Hemi 5.7
...and there you have it, folks. no opinions one way or the other, just facts.
Thanks B!
 
OP
OP
NYCruiser

NYCruiser

Senior Member
Joined
Dec 17, 2013
Posts
2,565
Reaction score
813
Location
Yonkers, NY
Ram Year
2014
Engine
Hemi 5.7
Actually most of these are light cleaners in mineral oil with various petroleum distillates like napethenic solvents. Actually they generally do help lubricate upper cylinders. However, if the company doesn't supply a Material Safety data sheet which usually shows if it is a solvent or detergent, it is snake oil. I didn't see a MSDS.

Not only upper cylinders, its a custom made crankcase oil they're selling. They claim it is a conventional oil base made to have synthetic properties. Synthetic oil longevity and lubrication with conventional oil benefits for seals. They also make a fuel additive, which sounds like you were commenting on.
 

Cliff p

Senior Member
Joined
Nov 4, 2013
Posts
142
Reaction score
20
Ram Year
2014
Engine
HEMI 5.7
I find this funny:

We had an engine on the dyno with an oil good for power but the only Quantum Blue on hand was the 15-45 oil specifically blended for a truck expected to haul 9,000 lbs up a long grade on a 110 degree summer day in the Mojave desert.

In the very next paragraph:

Almost immediately after starting one major factor was apparent: the oil pressure at any given temperature was at least 15 psi higher than with the 0-30 weight oil.

Well no ****! You just changed to a heavier weight oil, of course the oil pressures will be higher. That's a no brainer.

Here's another:
The EPA claims that zinc hurts emission control components namely the catalytic converter. We find this funny since most all vehicles since 1975 have had catalytic converters and emission control components.

What they fail to mention is that Catalytic Converter technology has improved since 1975, as well. Hence many vehicles now having PZEV designations, where not much has changed elsewhere. You still use unleaded fuel, you still use the same weight of motor oil, etc.

IMHO, I would go check out BITOG (bobistheoilguy) and ask around if you believe these guys carry any truth.
 

DannyMK2

Senior Member
Joined
Mar 25, 2013
Posts
1,732
Reaction score
498
Location
Long Island, NY
Ram Year
2015 Power Wagon
Engine
6.4 Hemi
i see a whole lot of claims on a crappy website, no actual test data. if it looks like a snake, it probably is.
 

Latest posts

Members online

Forum statistics

Threads
211,040
Posts
3,061,312
Members
171,096
Latest member
KAKA
Back
Top