Spindles+ Belltech kit

[Calrizzi]

First post, please be patient. I have a 2014 1500 hemi 2WD Crew cab that I am looking to lower. I'm looking at the bell tech kit but was considering how to go lower in the future if/when I get the itch. I know the IHR 4/6 uses belltech 4" springs cut to 6", my question is can I add the McGahey's spindles to the bell tech springs to get 4" up front? anybody tried? I wish I could do the 4/6 now, but that's not in the budget to looking to piece meal it and eventually do the viking shocks and rear control arms before going to 4/6.

 

[Calrizzi]

I should add that I'm looking to get lower now with an ultimate goal of adding fiberwerx fenders and bedsides and doing a widebody/drift look b/c I think it would be badass.

 

[Wild one]

First post, please be patient. I have a 2014 1500 hemi 2WD Crew cab that I am looking to lower. I'm looking at the bell tech kit but was considering how to go lower in the future if/when I get the itch. I know the IHR 4/6 uses belltech 4" springs cut to 6", my question is can I add the McGahey's spindles to the bell tech springs to get 4" up front? anybody tried? I wish I could do the 4/6 now, but that's not in the budget to looking to piece meal it and eventually do the viking shocks and rear control arms before going to 4/6.

I ran lowering springs with dropped spindles for awhile on my old 13 with no real issues except for wearing the bottom lip off on the airdam under the front bumper

 

[Calrizzi]

Don’t suppose you have any pictures do you?

 

[Wild one]

Don’t suppose you have any pictures do you?

Are you on any of the Ram facebook pages,like High Performance Rams / Tuned Rams / Ram R/T etc.,I can post pics there,don't do pics on here

 

[Calrizzi]

I followed a couple on Instagram but I’ll look for those Facebook pages. Thanks

 

[Calrizzi]

I’m on high performance rams now. Thanks for the tips

 

[Wild one]

I’m on high performance rams now. Thanks for the tips

Tag me if you want,and i'll post a couple pics of my old truck for you.
Rick Wildman

 

[Wild one]

I’m on high performance rams now. Thanks for the tips

I put a couple pics up of the truck on High Performance Rams for you Calrizzi.It's a little white regular cab shortbox.
Rick Wildman

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

 

[6speed4.7]

I put a couple pics up of the truck on High Performance Rams for you Calrizzi.It's a little white regular cab shortbox.
Rick Wildman

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

Hey Rick-in the pictures-spring drop and narrowed spindles?

 

[Calrizzi]

I put a couple pics up of the truck on High Performance Rams for you Calrizzi.It's a little white regular cab shortbox.
Rick Wildman

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

https://www.facebook.com/photo.php?...set=pcb.1233940203469464&type=3&theater&ifg=1

I really appreciate it and will be following suit. Thank you.

 

[Wild one]

Hey Rick-in the pictures-spring drop and narrowed spindles?

Spindles hadn't been narrowed yet,but yup a spindle + spring drop on it.Sort of miss that little truck,as it was as pretty if not prettier then the later red one,lol.