BlueHemi1500
Junior Member
This is all you need:
-Alfaobd
-Bypass: https://a.co/d/asxidfM
-OBD interface: https://a.co/d/82kNEcG
Thank you all for the information.I bought one of those inexpensive bypass cables from Amazon but with my '21 Warlock, it meant disassembling the dash and removing the radio to access the SGM.
Plus, IIRC, I would have to remove this bypass before visiting the dealer for maintenance or warranty work. Just an enormous PITA!
I procrastinated installing the bypass cable until I found the KaodTech solution from a Ram Forum member.
It took about 5 minutes to install and no need to remove it before visiting the dealership.
Security Module Bypass | KaodTech
If you have a 2018+ RAM and would like to perform diagnostics or make changes to the modules of your truck using tools like AlfaOBD or AutoEngenuity, this bypass is for you.Does this allow access to all modules?It has been tested connecting to the BCM and RFH. Since it bypasses the security...www.kaodtech.com
BTW, I like the OBD interface that you listed. It costs less than 1/3 of an Mx+.
.
I will be ordering the tools/parts this week from my local Bezo'z delivery folks.
You are correct I have a 5th Gen DT 2020 Laramie.
Then the real work of learning and reading. I have joined a few Ram boards and have done lots of reading and learning.
I have learned a lot from my fellow users. My fellow owners/users are great teachers and a wealth of information.
Thank you all for the help. Hoping to be able to fix this annoyance level of a problem.
BLueHemi1500