Thoughts on flomaster outlaw?

[Traves]

Looking to do my first upgrade and get the sounds i want. Stopped at a local muffler place and the owner suggested going with flomaster outlaw. After some research my only concern is it may be too loud, any thoughts?

 

[Fatbob Frank]

I have one.
They sound great!
I left everything else stock and just swapped mufflers.
The weight savings alone are worth the cost, that factory muffler is huge.
But ultimately it will cost you gas mileage cause you just can't help but stay on the skinny pedal...

 

[fprevos]

I also have the outlaw, sounds great. It did drone a bit much, I sound deadened the back seat and used an auger insert before the muffler to make it just right.

Now it sounds perfect when I hit the loud pedal.

 

[Nick@GotExhaust]

Flowmaster often drones a lot.

I recommend one of the options from Carven, especially with the 5" tips. The Carven mufflers have a nice deep tone and are quality stainless steel. Also the 5" tips look amazing and make the tone even deeper. We have them listed here
https://gotexhaust.com/c-1183874-ram-owners-preferred-products.html

You can use promo code CARVEN10 for a discount and free shipping!

 

[Saskwatch]

Looking to do my first upgrade and get the sounds i want. Stopped at a local muffler place and the owner suggested going with flomaster outlaw. After some research my only concern is it may be too loud, any thoughts?

What’s your stock gear ratio? After many hours of reading for my own purposes you often find that guys with different gear ratios experience different RPM ranges and load ranges that may cause drone, especially at highway speeds. To add more confusion, everyone has a different highway speed they consider actual highway speed. 60mph vs 80mph makes a big difference in rpm. So, while some guys say x and x mufflers don’t drone y and y mufflers do drone...just remember there is always more variables than just a muffler.

If it was me I’d avoid Flowmaster, but that’s just me. Borla, magnaflow, black widow, carven etc all make great options.

 

[Fatbob Frank]

Flowmaster often drones a lot.

I recommend one of the options from Carven, especially with the 5" tips. The Carven mufflers have a nice deep tone and are quality stainless steel. Also the 5" tips look amazing and make the tone even deeper. We have them listed here
https://gotexhaust.com/c-1183874-ram-owners-preferred-products.html

You can use promo code CARVEN10 for a discount and free shipping!

LOL--Of course the guy who doesn't sell Flowmaster is going to recommend something he (coincidentally) does sell!
Just breakin' your balls Nick!
That is a really good deal on the Carven and based on how fast my Flowmaster is rusting, probably a better choice-though I haven't noticed any drone from my Outlaw.

 

[Michael Jones]

Flowmaster often drones a lot.

I recommend one of the options from Carven, especially with the 5" tips. The Carven mufflers have a nice deep tone and are quality stainless steel. Also the 5" tips look amazing and make the tone even deeper. We have them listed here
https://gotexhaust.com/c-1183874-ram-owners-preferred-products.html

You can use promo code CARVEN10 for a discount and free shipping!

Yo! Nick!
How about some options for 2018 Ram 2500 6.4L crewcab 6ft bed 4x4 Tradesman ?

 

[Nick@GotExhaust]

Yo! Nick!
How about some options for 2018 Ram 2500 6.4L crewcab 6ft bed 4x4 Tradesman ?

SURE, here you go
https://gotexhaust.com/i-23646761-s...nce-muffler-delete-replacement-6-4l-hemi.html
https://gotexhaust.com/i-23687758-s...00-muffler-replacement-kit-for-6-4l-hemi.html

These are our 2 top sellers for the 2500/3500 6.4. Let me know if you have any questions.

 

[Nick@GotExhaust]

LOL--Of course the guy who doesn't sell Flowmaster is going to recommend something he (coincidentally) does sell!
Just breakin' your balls Nick!
That is a really good deal on the Carven and based on how fast my Flowmaster is rusting, probably a better choice-though I haven't noticed any drone from my Outlaw.

We actually do sell Flowmaster I just dont recommend it for that very reason, they tend to rust out quick and usually drone. Plus MOST of their mufflers are chambered which does not promote better flow. I will always recommend a straight thru style muffler over a chambered one.

 

[Michael Jones]

SURE, here you go
https://gotexhaust.com/i-23646761-s...nce-muffler-delete-replacement-6-4l-hemi.html
https://gotexhaust.com/i-23687758-s...00-muffler-replacement-kit-for-6-4l-hemi.html

These are our 2 top sellers for the 2500/3500 6.4. Let me know if you have any questions.

Any dual exhaust systems/options Nick ?

 

[Nick@GotExhaust]

Any dual exhaust systems/options Nick ?

Yes we do but dont have them currently listed on the site. MBRP and Gibson make nice dual kits. I'll message you

 

[Michael Jones]

Opinions on Borla, AFE, Magna flow, Gibson or MBRP ?

Was looking on Summit racing and gotexhaust.com

Thinking of just going single cat back passenger side exhaust system instead of dual

 

[beepster]

Does Carven still plaster their name on the black 5" tips?

 

[boblonben]

Looking to do my first upgrade and get the sounds i want. Stopped at a local muffler place and the owner suggested going with flomaster outlaw. After some research my only concern is it may be too loud, any thoughts?

Have and use Flowmaster 40's, they are the best trade in cost, sound, and performance. good luck...

 

[Alweeja]

If this exhaust is Too loud, you are too Old

 

[Skipper]

Looking to do my first upgrade and get the sounds i want. Stopped at a local muffler place and the owner suggested going with flomaster outlaw. After some research my only concern is it may be too loud, any thoughts?

Travis, Glad to see someone from Savannah on here. I'm from Savannah and lived on Abercorn about a mile from Armstrong. The Super 10 Outlaw muffler has a deep throaty idle and takeoff sound with a little drone at certain rpms but to me it sounds pretty mean.

 

[KnurledNut]

I started with the Carven Progressive w/ 5" tips. Nice sound, but the drone between 55-65 was way too much. Switched out the muffler only to a Borla ProXS and couldn't be happier. She roars when I want her too but has little to no drone when cruising.

FWIW, the Carven is a DIY kit, the clamps never sealed correctly, even with a replacement set sent by Carven. You best bet is to have your next muffler welded on.

 

[George Anderson]

Looking to do my first upgrade and get the sounds i want. Stopped at a local muffler place and the owner suggested going with flomaster outlaw. After some research my only concern is it may be too loud, any thoughts?

I love the sound, minimal drone.

 

[RixRox]

Aluminized steel and made in China. No thanks.

https://www.gmt400.com/threads/flowmaster-mufflers-made-in-china-now.47031/

 

[noodles]

Installed the FM Outlaw and the first few days, it was extremely loud. Then, it seemed to calm a bit and had to re-tighten the clamps. Much better now, sound wise.