Throttle position sensor lightning bolt light

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Beard commander

Junior Member
Joined
May 9, 2021
Posts
2
Reaction score
0
Location
South
Ram Year
2005
Engine
5.7 hemi
All of a sudden had a lightning bolt start flashing on my dash and loss of power and no overdrive. Truck acts like it’s in limp mode, no codes thrown until turning key 5 times, then 2 codes show on the dash (p2127 & p2122). I’ve replaced the throttle body and the entire gas pedal with sensor. Still in limp mode with limited power, no overdrive and lightning bolt light is still flashing. What is wrong with my truck or how do I reset this light?!

2005 Dodge Ram 1500 5.7 Hemi
 

Nick_rp

I=V/R
Joined
Jun 21, 2018
Posts
676
Reaction score
683
Location
puyallup, wa
Ram Year
2012 1500
Engine
5.7 Sport
All of a sudden had a lightning bolt start flashing on my dash and loss of power and no overdrive. Truck acts like it’s in limp mode, no codes thrown until turning key 5 times, then 2 codes show on the dash (p2127 & p2122). I’ve replaced the throttle body and the entire gas pedal with sensor. Still in limp mode with limited power, no overdrive and lightning bolt light is still flashing. What is wrong with my truck or how do I reset this light?!

2005 Dodge Ram 1500 5.7 Hemi

Not sure if the relearn procedure is supposed to fix that but id try it anyway. Did you check for voltage from the connector? Its only 5v so any sort of added resistance like corrosion will throw it off. That or a broken wire may have been the issue to begin with.
 
Last edited:
Back
Top