Timing

[Rbusbee21]

I just had the heads redone on my 02 4.7 it has the dual over head canes how do i time it correctly any help would be greatly appreciated

 

[HemiLonestar]

I just had the heads redone on my 02 4.7 it has the dual over head canes how do i time it correctly any help would be greatly appreciated

1. What are over head canes?
2. If you have double overhead cams then you do not have a 4.7; 4.7 is single overhead cam
3. If you do have a 4.7 with it's single overhead cam, you'll need these pages specifically (if you want the whole manual, it's in the service manual sticky)

 

[Rbusbee21]

I do have a 4.7 it does have dual overhead cams if it not a 4.7 then what motor is because everything on it says 4.7 either way my timing is off and how to get in time would be helpful i already have it tdc but my v8 on my sprockets are not line up at 12 o’clock so how do i got about it from there

 

[Rbusbee21]

I sorry for my confusion i have a cam per head i was under the impression that was consider dual overhead cam i have one cam per head on a 4.7 my issue is how do i get the v8 marks were they need to be my main chain is a tdc this is the only thing keeping my truck from going on the road

 

[Rbusbee21]

So basically my valve timing is off

 

[Rbusbee21]

02 ram 1500 4.7 valve timing is off i have it on Tdc how do i get the cam spokets to the v8 mark at twelve oclock for correct timing

 

[LoneWolf3574]

1. What are over head canes?
2. If you have double overhead cams then you do not have a 4.7; 4.7 is single overhead cam
3. If you do have a 4.7 with it's single overhead cam, you'll need these pages specifically (if you want the whole manual, it's in the service manual sticky)

This

 

[HemiLonestar]

I do have a 4.7 it does have dual overhead cams if it not a 4.7 then what motor is because everything on it says 4.7 either way my timing is off and how to get in time would be helpful i already have it tdc but my v8 on my sprockets are not line up at 12 o’clock so how do i got about it from there

Yes it's a 4.7, but a 4.7 has a SINGLE CAM OVER THE HEAD, as in SINGLE OVER HEAD CAM lol

I sorry for my confusion i have a cam per head i was under the impression that was consider dual overhead cam i have one cam per head on a 4.7 my issue is how do i get the v8 marks were they need to be my main chain is a tdc this is the only thing keeping my truck from going on the road

Dual overhead cam quite literally means TWO CAMS OVER THE HEAD lol, like so

So basically my valve timing is off

02 ram 1500 4.7 valve timing is off i have it on Tdc how do i get the cam spokets to the v8 mark at twelve oclock for correct timing

Did you download the factory service manual chunk (that has the FACTORY instructions) I posted for you? Have you bothered to look for the actual instructions on how to do this or did you figure you'd join a forum and just have people tell you how to do it?

 

[Rbusbee21]

Listen buddy yes i looked at that yes but see what’s missing is valve timing which is what I’m needing there’s one section at the begining and that’s it

 

[Rbusbee21]

And to be perfectly clear if i wanted someone to do it it would be in a shop hints the other reason I’m on here asking questions so no need for the disrespectful ness your coming off with question is if your not here to help then why are you even on the forum forums are created to help other no get all made cuz someone asking how to do something but hey sorry for take time away from you bud but if you didn’t feel like responding why did you

 

[HemiLonestar]

And to be perfectly clear if i wanted someone to do it it would be in a shop hints the other reason I’m on here asking questions so no need for the disrespectful ness your coming off with question is if your not here to help then why are you even on the forum forums are created to help other no get all made cuz someone asking how to do something but hey sorry for take time away from you bud but if you didn’t feel like responding why did you

*I
*hence
*disrespectfulness
*you're
*you're
*mad
*because
*taking
PUNCTUATION!!!! I was wondering if that was Milton FL...thank you for confirming lol.

1. There's a big difference between you wanting someone else to do it and you having the aptitude to do so.
2. I am direct. You can't handle direct, go snowflake somewhere else lol.
3. Forums were created for people to get together to talk about a common subject; help is a by-product.
4. Who's mad? You don't matter enough to me to even remotely make me mad bwahaha, though I do get annoyed at people who just show up specifically expecting an answer just handed to them on a silver platter. It is quite evident that you're in over your head after not doing your due diligence and research.

Lay off the talk to text lol

Now, since you seem to just pick and choose what you bother read (comprehend?), if that piece of the manual doesn't have what you need, you can get your whole manual from the service manual sticky (as I stated before). As I get the impression that was too much for you to understand, here is the link: https://www.ramforum.com/threads/3rd-gen-parts-manuals-and-2003-2004-service-manuals.6504/
If that proves to be too overwhelming for you, contact airram.com, they specialize in the 4.7 and should be able to hold your hand and spoon feed you through it.

 

[Rbusbee21]

No body’s looking for any hand outs or silver platter buddy it was simple question and the only thing pulling up on the sticky you threw in your link was three pages not specifically what I’m looking for and for the record no I’m not mad but hey it okay bud this ain’t my first rodeo i do get we’re your coming from i do but if i wanted a hand out i would send it to the dealer ship just advice that’s was all