Tire Size

[cereb6]

Will 295/65R20 fit on 2016 1500 leveled in front without rubbing?

 

[BOWERSFJ]

I wouldn’t ... Stick with 295/60R20 ... Same width, just a lil shorter ... Just a lil safer ... Even if they didn’t rub, 65’s would look stuffed ...


Sent from my iPhone using Tapatalk

 

[Princeton_Man]

I agree! I run 295-60s without rubbing and the extra width is a traction bonus. Not to mention they look good.

 

[cereb6]

I have 275/65 R20's now and they are 34.1's. They don't rub at all. So a 295 wouldn't rub?

 

[BOWERSFJ]

I have 275/65 R20's now and they are 34.1's. They don't rub at all. So a 295 wouldn't rub?

Google what the metric numbers mean .... 295 is the tread width ... 60 or 65 is the sidewall percentage based on the tread width ... A 295/65 is over 35” tall ... Tire rack will give you the exact sizes ... I stand by my original comment ... The 65 is too much for just a level ... But it’s your truck


Sent from my iPhone using Tapatalk

 

[cereb6]

I didn't put the 275/65's on it. I was asking you if the size you mentioned would rub since it is 295 mm wide and the tire I am currently running is 275 mm wide. It doesn't look like there is a whole lot of room between the tire and the upper control arm when the wheels are turned. I don't like the stuffed look either but I also don't like too much fender well showing. Just trying to figure out some options.

 

[BOWERSFJ]

295 will not run the UCA, and the 60 will be a touch over 34” ... Should be perfect ... Custom Offsets has a **** ton of gallery pictures ... Plug in level and your tire size and review the pics


Sent from my iPhone using Tapatalk

 

[cereb6]

295 will not run the UCA, and the 60 will be a touch over 34” ... Should be perfect ... Custom Offsets has a **** ton of gallery pictures ... Plug in level and your tire size and review the pics


Cool. Thanks bud.


Sent from my iPhone using Tapatalk