TPMS Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bnip1

Junior Member
Joined
Jun 15, 2025
Posts
1
Reaction score
1
Location
Florida
Ram Year
2008
Engine
6.7 Cummins
I have a 2008 2500 SLT 4X4 6.7 Cummings. I've had ongoing TPMS indication problems. Initially I was told by a dealer that the wheel sensors needed to be changed. They replaced the wheel sensors with factory Dodge sensors which were rubber vs the metal version that came out of the wheels that the truck originally cane with. I was told that the new sensors with the rubber valve stems were the updated replacements. After these new replacements, just like before, I would drive the truck approximately 50-60 miles and the TPMS light would begin flashing. Repeated trips to the dealers resulted in changing out the wheel sensors again, under warranty this time, and replacing both the front wheel well antenna/signal transmitters, and the module that goes around the ignition key. I believe it was called "WIN module". The problem persisted and now after several months when starting the truck I get the chime and the flashing TPMS light and then about every 20-30 minutes the light will flash with no chime and continue for the remainder of my drive.

Any help with this issue would be greatly appreciated, thanks.
 

HemiLonestar

Senior Member
Navy Badge Coast Guard
Joined
Jun 1, 2012
Posts
6,770
Reaction score
4,620
Location
MD
Ram Year
2016
Engine
5.7 hemi
Cummings lol
It sounds like the so called replacements aren't backwards compatible with the truck....I'm guessing the old ones are long gone (for part number comparison)?
 
Back
Top