Transfer help

[2515x3jj]

Hello everyone. I rebuilt my NP241HD for my 95 2500 and the " slinger seal " was destroyed. I went to the dealer and the part is discontinued. Part # 4210611
I did some web searching with no luck. Can someone tell me or guide me in the right direction so I can finish this.
Thank you....

 

[Fast69Mopar]

Hello everyone. I rebuilt my NP241HD for my 95 2500 and the " slinger seal " was destroyed. I went to the dealer and the part is discontinued. Part # 4210611
I did some web searching with no luck. Can someone tell me or guide me in the right direction so I can finish this.
Thank you....

Do you have the old one? If you can post a picture of the old seal I should be able to get you a part number for a new one.

 

[2515x3jj]

There is VERY little left... Not enough to identify. I have the part# from the dealer. If that helps, look at original post... Thank you l

 

[Fast69Mopar]

There is VERY little left... Not enough to identify. I have the part# from the dealer. If that helps, look at original post... Thank you l

Do you have the NP241D transfer case or the NP241DHD?

Is this your seal protector?

 

[2515x3jj]

I have the HD model....
As far as the pic, I don't know. There is not enough to know. All that's left is the inside diameter ring and maybe 3-5mm more that is attached to it... Thank you

 

[Fast69Mopar]

I have the HD model....
As far as the pic, I don't know. There is not enough to know. All that's left is the inside diameter ring and maybe 3-5mm more that is attached to it... Thank you

After thinking about it, the last NP241D-HD I overhauled a few years ago, I used this kit from Allstate Gear...

https://www.allstategear.com/NP241DHD-Dodge-Transfer-Case-Seal-and-Gasket-Kit-p/tsk-241a.htm

 

[2515x3jj]

I shall try it. Thank you sir, for your time and efforts..