Paul lynch
Junior Member
- Joined
- Mar 5, 2021
- Posts
- 20
- Reaction score
- 3
- Location
- Decatur, Illinois
- Ram Year
- 2014
- Engine
- Hemi 5.7L
Hey, folks. I've had a problem with my 14 Ram 1500. I did a cam kit install, which came with the cam, springs, shims, pushrods and lifters. It was a purchase from Jay green about a couple years back and noticed shortly after she is eating oil like no other. I knew right away, them ebay valve seals got me. I should have known better, right?! I opened it up and found most of the valve seals were indeed just floating on the steam. So, I replaced them with felpro valve seals and it seemed to take care of the issue. However, after a week or so it's burning oil again. I made sure I seated them new seals well but they are not staying seated. I haven't opened it back up but I know what I'm going to find. I'm curious if anyone else is having this problem? I don't have any idea. Any and all help would be greatly appreciated.