Warlock front bumper tilting?

[Bambi66]

Hi there all. I picked up a 2019 Classic Warlock a handful of months ago. The truck has treated me very well. I recently noticed under the headlight on the passenger side of the front bumper, has a larger gap than the driver side. The bumper feels very solid when I pull on it. But there is a clear larger gap compared to the driver side. Has anyone experienced this or seen it on another truck before? Thank you.

 

[Dean2]

Vibration has caused it to move and while it feels solid, the bolts are not fully tight. Loosen, align, tighten to torque.

 

[04fxdwgi]

Looking at the pics, it looks like the bumper is jogged slightly to the right also. My money is that someone tagged it in a parking lot or something.

My old F150 did exactly the same thing as your when it was tagged on the drivers side front corner. No paint damage, just moved.

 

[Bambi66]

That would make sense with it being a steel bumper.. No marks but still shifted.

 

[Bambi66]

Vibration has caused it to move and while it feels solid, the bolts are not fully tight. Loosen, align, tighten to torque.

I’ll have to look up where the bumper mounts are and give that a shot.

 

[Daw14]

My 14 is the same , it bothered me for a short time . Then I figured why give it a second thought , I’m the only person that is aware of , or even gives a $iht.

That was t eleven years ago , and have not been concerned since .

That caused me to stop sweating the small stuff .